Lalizas Coastal Compact II Liferaft

The Lalizas Coastal Compact II Liferaft is a compact, lightweight emergency liferaft for coastal boaters, available in 2-person, 4-person and 6-person capacities. Choose an open model without a canopy or a 4-person or 6-person model with an integrated inflatable canopy. Each model uses a single-tube, single-compartment structure manufactured from polyurethane-coated nylon fabric. The tubes and floor are thermally bonded using high-frequency, radio-frequency and hot-air welding rather than adhesive. The TPED-approved CO2 cylinder and Lalizas inflation system deploy the raft in less than 30 seconds, while every version is supplied in a compact valise for accessible onboard storage. Product Identification Brand: Lalizas Product range: Coastal Compact II Product category: Coastal valise liferaft Part numbers: 76339, 76340, 76341, 76342 and 76343 Available capacities: 2, 4 or 6 people Canopy options: Without canopy or with integrated canopy Container: Valise Construction: Single tube and single compartment Tube and floor fabric: Polyurethane-coated nylon Bonding method: High-frequency, radio-frequency and hot-air welding Adhesive used in tube and floor construction: No Inflation: CO2 inflation system Published inflation time: Less than 30 seconds CO2 cylinder: TPED approved Inflation-system certification: ISO 15738:2019 Warranty: Transferable 12-year warranty on fabric and seams, subject to storage and authorised-service conditions Quantity supplied: One liferaft in the selected configuration What Is the Lalizas Coastal Compact II Used For? The Coastal Compact II provides an emergency flotation platform following abandonment of a boat in coastal or suitable sheltered-water conditions. Coastal sailing and motor boating Leisure craft with restricted liferaft storage space Yachts, motorboats, RIBs and small workboats Owners seeking a lightweight valise-packed liferaft Emergency abandonment where a compact raft is required Boats where weight and storage volume are important considerations The raft supplements the vessel's wider safety equipment. It does not replace correctly fitted lifejackets, distress-signalling equipment, communications equipment or a properly prepared emergency grab bag. Which Models Are Available? 76339 – 2 Person, Without Canopy: 5kg raft supplied in a 535 × 306 × 170mm valise 76340 – 4 Person, Without Canopy: 7kg raft supplied in a 450 × 390 × 170mm valise 76341 – 6 Person, Without Canopy: 9kg raft supplied in a 510 × 395 × 193mm valise 76342 – 4 Person, With Canopy: 8kg raft supplied in a 450 × 390 × 190mm valise 76343 – 6 Person, With Canopy: 10kg raft supplied in a 510 × 395 × 193mm valise What Is Included? One liferaft in the selected capacity and canopy configuration Valise container 6m / 20ft painter line Manual inflation pump Sea anchor Floating safety knife Pressure-relief valve Inflation and deflation valve Bailer Lalizas water-activated LED liferaft light Double water pockets for improved stability Two-step boarding ladder Factory-installed CO2 inflation system What Is Not Included? Lifejackets or personal flotation devices Distress flares or electronic distress signals EPIRB, PLB or AIS locator Handheld VHF radio Drinking water or emergency food rations First-aid kit Thermal protective aids Additional survival equipment or grab bag Hydrostatic release unit Deck cradle or canister Liferaft servicing Canopy on the without-canopy models Carry any additional survival equipment required by the vessel's operating area, flag administration, insurer, race rules or local regulations in a separate accessible grab bag. What Is the Difference Between the Canopy and Open Models? The without-canopy models provide the lowest packed weight and an open emergency platform: 2-person without canopy 4-person without canopy 6-person without canopy The canopy models add overhead protection and an automatically deploying inflatable arch: 4-person with canopy 6-person with canopy On canopy-equipped models, the canopy arch is connected directly to the main chamber and inflates as the raft deploys. An oral inflation tube allows the arch pressure to be topped up if required. How Has the Coastal Compact II Been Updated? The canopy arch is connected to the main chamber and inflates automatically. Separate manual inflation of the canopy arch is no longer normally required. The revised arch provides sufficient support without internal support straps. Removing the support straps creates a clearer interior. The redesigned canopy uses multiple hook-and-loop attachment points. The canopy is easier to position and manage after deployment. The external light is positioned at the upper part of the canopy for visibility. A two-step boarding ladder replaces the previous single-step arrangement. The revised boarding arrangement provides increased support when entering from the water. How Do I Select the Correct Capacity? Select a raft with enough rated places for the maximum number of people who may need to board it. Maximum number of crew and passengers Available deck or locker storage Valise dimensions Liferaft weight Whether a canopy is required Vessel operating area Flag-state carriage requirements Insurance conditions Racing or coding requirements Accessibility in an emergency Do not select a smaller raft on the assumption that occupants can exceed its stated capacity. Should I Choose a Canopy? Choose a canopy model where protection from wind, spray, rain and exposure is a priority. Longer expected rescue times Colder or exposed operating areas Night passages Coastal cruising beyond immediate harbour waters Crews that may benefit from additional shelter An open version provides lower weight and simpler access but does not provide overhead shelter. How Does the Integrated Canopy Work? The inflatable canopy arch is connected to the main chamber. The arch inflates during normal raft deployment. The canopy deploys with the raft without a separate manual inflation stage. The canopy is retained using multiple attachment points. An oral inflation tube is fitted to the canopy arch. The arch can be topped up manually if additional pressure is required. Construction and Design Thermoplastic polyurethane-coated nylon fabric Thermally bonded tube and floor construction High-frequency and radio-frequency welding Hot-air welding No glue used in the raft tube or floor assembly Single inflatable tube Single buoyancy compartment TPED-approved CO2 cylinder ISO 15738:2019-certified Lalizas inflation system Pressure-relief valve Manual top-up pump Double stabilising water pockets 6m painter line Two-step boarding ladder Compact valise packaging Integrated inflatable canopy on selected variants How Is the Liferaft Deployed? Always follow the instructions attached to the raft and the vessel's emergency plan. Remove the valise from its stowage position. Secure the painter line to a suitable vessel strong point. Throw the liferaft clear of the vessel and any obstructions. Pull out the painter line fully. Pull firmly to activate the CO2 inflation system. Allow the raft to inflate clear of the vessel. Pull the inflated raft alongside for boarding. Board using the ladder. Deploy the sea anchor when safe to do so. Cut the painter only when separation from the vessel is necessary. Inflation System and Equipment The raft uses a Lalizas CO2 inflation system certified according to ISO 15738:2019. The published inflation time is less than 30 seconds. The painter connects the raft to the vessel and activates inflation. The sea anchor helps reduce drifting. The bailer removes water from inside the raft. The manual pump restores pressure if required. The floating knife can be used to cut the painter. The water-activated LED light assists visibility. The water pockets increase stability after filling. Storage and Installation Keep the raft in a dry, ventilated and accessible position. Protect the valise from fuel, oil, battery acid and solvents. Keep it away from sharp objects and excessive heat. Do not place heavy equipment on top of the valise. Do not open or repack the raft outside an authorised service environment. Secure the raft so it cannot move during normal vessel operation. Keep the painter accessible and correctly arranged. Ensure the deployment route is not blocked by rails, covers or equipment. Record the manufacturing and next-service information in the vessel's safety records. Servicing and Warranty The Coastal Compact II must be serviced through a Lalizas-authorised service station at the intervals required by Lalizas and the applicable flag administration. Raft fabric and welded seams CO2 cylinder Inflation head Valves Painter line Canopy and arch Boarding ladder Water pockets Light and equipment pack Valise condition Expiry-controlled components The transferable 12-year warranty applies to the fabric and seams, subject to correct storage and completion of the required authorised servicing. Key Features Five capacity and canopy configurations 2-person, 4-person and 6-person models Canopy available on 4-person and 6-person rafts Compact valise packaging Published weights from 5kg to 10kg Inflation in less than 30 seconds Integrated automatic canopy deployment on canopy models Oral top-up tube for the canopy arch Single-tube, single-compartment construction Polyurethane-coated nylon fabric Glue-free thermal bonding TPED-approved CO2 cylinder ISO 15738:2019-certified inflation system 6m painter line Manual pump Sea anchor Floating knife Bailer Water-activated LED liferaft light Double stabilising water pockets Two-step boarding ladder Transferable 12-year fabric-and-seam warranty, subject to terms Frequently Asked Questions Which Coastal Compact II sizes are available? The range includes a 2-person raft without a canopy, plus 4-person and 6-person rafts with or without a canopy. Is a 2-person canopy model available? No. The published 2-person model, code 76339, is supplied without a canopy. Does the canopy inflate automatically? Yes. On codes 76342 and 76343, the canopy arch inflates and deploys with the main raft chamber. An oral tube is provided for topping up the arch if required. How quickly does the raft inflate? Lalizas publishes an inflation time of less than 30 seconds. Is the raft supplied in a canister? No. All five listed Coastal Compact II models are supplied in a valise. Does it include a sea anchor? Yes. One sea anchor is included. Does it include a light? Yes. One Lalizas water-activated LED liferaft light is included. Are emergency rations and flares included? They are not listed in the standard equipment pack. Prepare a separate grab bag where additional survival equipment is required. Is the complete liferaft certified to ISO 15738? The published specification states that the CO2 inflation system is certified to ISO 15738:2019. Confirm any separate liferaft approval or carriage standard required for the vessel before ordering. How often must it be serviced? Follow the interval stated by Lalizas, the authorised service station and the vessel's flag administration. The warranty depends on completion of the required authorised servicing. What does the 12-year warranty cover? Lalizas states that the transferable warranty applies to the raft fabric and seams from the date of manufacture, subject to correct storage and servicing conditions. Does a liferaft replace a lifejacket? No. Every person aboard should still have access to a suitable, correctly fitted lifejacket. Specifications Specification 76339 76340 76341 76342 76343 Brand Lalizas Lalizas Lalizas Lalizas Lalizas Product range Coastal Compact II Coastal Compact II Coastal Compact II Coastal Compact II Coastal Compact II Maximum persons 2 4 6 4 6 Canopy Without canopy Without canopy Without canopy With canopy With canopy Inflated height – A 220mm 270mm 300mm 1050mm 1100mm Inflated width – B 1450mm 1950mm 2250mm 1950mm 2250mm Inflated length – C 1350mm 1850mm 2150mm 1850mm 2150mm Container Valise Valise Valise Valise Valise Packed length 535mm 450mm 510mm 450mm 510mm Packed width 306mm 390mm 395mm 390mm 395mm Packed height 170mm 170mm 193mm 190mm 193mm Published weight 5kg 7kg 9kg 8kg 10kg Tube arrangement Single tube Single tube Single tube Single tube Single tube Buoyancy compartments 1 1 1 1 1 Tube and floor fabric Polyurethane-coated nylon Polyurethane-coated nylon Polyurethane-coated nylon Polyurethane-coated nylon Polyurethane-coated nylon Bonding method Thermal welding Thermal welding Thermal welding Thermal welding Thermal welding CO2 cylinder TPED approved TPED approved TPED approved TPED approved TPED approved Inflation time Under 30 seconds Under 30 seconds Under 30 seconds Under 30 seconds Under 30 seconds Inflation system ISO 15738:2019 ISO 15738:2019 ISO 15738:2019 ISO 15738:2019 ISO 15738:2019 Integrated inflatable canopy arch Not applicable Not applicable Not applicable Yes Yes Canopy oral top-up tube Not applicable Not applicable Not applicable Yes Yes Painter line 6m / 20ft 6m / 20ft 6m / 20ft 6m / 20ft 6m / 20ft Manual pump Included Included Included Included Included Sea anchor Included Included Included Included Included Floating knife Included Included Included Included Included Bailer Included Included Included Included Included Water-activated LED light Included Included Included Included Included Stabilising water pockets Double Double Double Double Double Boarding ladder Two step Two step Two step Two step Two step Warranty 12 years on fabric and seams, subject to terms 12 years on fabric and seams, subject to terms 12 years on fabric and seams, subject to terms 12 years on fabric and seams, subject to terms 12 years on fabric and seams, subject to terms Quantity supplied One liferaft One liferaft One liferaft One liferaft One liferaft Select the liferaft by its rated capacity, canopy configuration, packed dimensions and weight. Verify that the selected model and its equipment pack meet the vessel's flag-state, insurance, coding or racing requirements before purchase.