Electronic Valved Performance Muffler, 3" Dual Kit, Variable Volume, Polished Stainless Steel

Volume on Command - At the press of a button, unleash the full potential of your engine Precision Construction - Robotically TIG welded polished 304 stainless steel case Universal Fitment - Thanks to the relatively small form-factor, the ValveSonic muffler can fit in-place of most standard mufflers Choosing the right muffler for your exhaust system can be a very difficult decision. Not only do you need to consider the tone you want, but also how loud the end result will be out the exhaust tip. The ValveSonic muffler from Krakatoa combines the best aspects from a reverse flow muffler and a valved cut-out, therefore giving you the flexibility to run mild or wild. The perfect solution to noisy cold starts, just close the valve. Will get the neighbours of your back! The ValveSonic muffler primarily functions as a 3 pipe reverse flow (turbo style) muffler when the valve is closed. The internal piping features small perforations which allow the exhaust pulses to be absorbed by the surrounding acoustic packing. The exhaust will then exit from the muffler case and re-join the system just after the valve. When the valve is in the open position, the exhaust will instead flow straight through - bypassing the muffler all together. Unlike other valved mufflers on the market which are vacuum operated, requiring a pump and vacuum lines, the ValveSonic mufflers are electronically operated. Being electronic means that there are far less failure points when compared to a vacuum system, such as split hoses, leaking diaphragms or a defective pump. Due to the small form-factor motor, these mufflers can be fitted into most locations where a conventional style muffler would be installed. Additionally, because these are 304 stainless steel, you are ensured of a long lifespan thanks to the outstanding corrosion resistant properties of 304SS. Installation is also a straightforward as the unit is pre-terminated with a 12V power socket (cigarette lighter) connection. Each ValveSonic muffler kit includes all necessary wiring, along with 2 wireless remotes (batteries not included) and electronic signal receiver/controller module. Suitable For Universal: Can be fitted to most applications where a standard oval case muffler would normally be fitted. Must have a 12 volt system. Product Specifications Design: Reverse flow style muffler with acoustic packing, with integrated electronically controlled valve Inlet / Outlet Size: 3" (outside diameter) Muffler Case Size: 11" (L) x 9-1/2" (W) x 5-3/8" (H) Overall Size: 19-3/4" (L) x 9-1/2" (W) x 6-1/2" (H) Includes: 2 ValveSonic mufflers, 2 remote controls, wiring harness, electronic receiver/controller Important Note: Batteries are not included with the remotes. These must be purchased separately. The required unit is a CR2016 coin style battery This listing is for a set of 2 mufflers. These are also available as a single unit kit, refer to part number OUT-1122. Off-road use only when the valve is open