BrushMonster Mulcher Revolution Axe For Skid Steer

BrushMonster Mulcher | Model Revolution Axe Series | 64"–77" Cutting Width | Axial Piston Motor | 15–45 GPM | AR400 & 5160 Blades | For Skid-Steer Loaders DESCRIPTION The BrushMonster Revolution Axe Series redefines high-performance mulching with a lineup of cutters designed for both standard and high-flow skid-steer loaders. Available in 64" and 77" cutting widths, these units are powered by a premium Axial Piston motor delivering up to 6000 PSI with 95% efficiency, reaching speeds of 1100 RPM at peak flow. Each model features a rugged blade system—either AR400 or 5160 hardened steel—paired with concave mulching teeth for aggressive vegetation reduction. The dual-layer welded deck enhances structural integrity, while the locking shaft pin provides critical protection in case of bearing failure. With easy blade access through the top deck and compatibility across a wide hydraulic range (15–45 GPM), the Revolution Axe Series is built to dominate brush, saplings, and small trees in forestry, land clearing, and vegetation management. Key Features Axial Piston Motor: 95% efficiency up to 6000 PSI for consistent torque and cutting power Hydraulic Flow Compatibility: Supports Standard (15–24 GPM), Mid (25–30 GPM), and High (31–45 GPM) systems Max RPM Performance: Up to 1100 RPM at full flow for rapid mulching Blade Options: AR400: ¾" × 19" × 6" or ½" × 18" × 6", 5160: ½" × 12" × 5" Mulching Teeth: 12–16 concave teeth (1⅛") for fine material breakdown Deck Construction: Dual ½" plate welded design for maximum durability Blade Access: Top-deck service port for quick blade changes Safety Locking Pin: Prevents shaft damage in case of bearing failure Machine Compatibility: Designed for skid-steer loaders with standard or high-flow hydraulics Detailed Specifications Specification Revolution 64" Standard Revolution 64" High Cutting Width 64" 64" Hydraulic Flow 15–24 GPM 31–45 GPM Motor Type Axial Piston Axial Piston Max RPM 1100 RPM 1100 RPM Blade Type 5160 AR400 Blade Specs ½" × 12" × 5" ½" × 18" × 6" Mulching Teeth 16 × 1⅛" concave 12 × 1⅛" concave Deck Design Dual-layer welded deck Dual-layer welded deck Weight Not Specified Not Specified Specification Revolution 77" Standard Revolution 77" High Revolution Axe 77" High Cutting Width 77" 77" 77" Hydraulic Flow 15–45 GPM 31–45 GPM 31–45 GPM Motor Type Axial Piston Axial Piston Axial Piston Max RPM 1100 RPM 1100 RPM 1100 RPM Blade Type AR400 5160 AR400 Blade Specs ½" × 18" × 6" ½" × 12" × 5" ¾" × 19" × 6" Mulching Teeth 12 × 1⅛" concave 16 × 1⅛" concave 16 × 1⅛" concave Deck Design Dual-layer welded deck Dual-layer welded deck Dual-layer welded deck Weight 1550 lbs Not Specified 1750 lbs