2C24 ESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640

Description ESP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system. It integrates Wi-Fi, traditional Bluetooth and BLE beacons with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range of 80 MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications. Specifications Module model ESP32-CAM Package DIP-16 Size 27*40.5*4.5(±0.2)mm SPI Flash default 32Mbit RAM internal520KB+external 4M PSRAM bluetooth Bluetooth 4.2BR/EDR and BLE standards Wi-Fi 802.11 b/g/n/e/i Support interface UART, SPI, I2C, PWM Support TF card Maximum support 4G IO port 9 Serial port rate default: 115200 bps Image output format JPEG (only supported by OV2640), BMP, GRAYSCALE Spectrum range 2412 ~ 2484MHz Antenna form onboard PCB antenna , gain 2dBi Transmit power 802.11b: 17±2 dBm (@11Mbps) 802.11g: 14±2 dBm (@54Mbps) 802.11n: 13±2 dBm (@MCS7) Receiving sensitivity CCK, 1 Mbps : -90dBm CCK, 11 Mbps: -85 dBm 6 Mbps (1/2 BPSK): -88dBm 54 Mbps (3/4 64-QAM): -70 dBm MCS7 (65 Mbps, 72.2 Mbps): -67dBm Power consumption Turn off the flash: 180 mA at 5 V Turn on the flash and adjust the brightness to the maximum: 310mA@5V Deep-sleep: The lowest power consumption can reach 6 mA at 5 volts. Modern-sleep: up to 20 mA at 5 volts Light-sleep: up to 6.7 mA at 5 volts Security WPA/WPA2/WPA2-Enterprise/WPS Power supply range 5V Operating temperature -20 °C ~ 85 °C Storage environment -40 °C ~ 90 °C, < 90%RH ESP32-CAM Picture Output Format Rate QQVGA QVGA VGA SVGA JPEG 6 7 7 8 BMP 9 9 - - GRAYSCALE 9 8 - - Test environment: camera model: OV2640 XCLK: 20MHz, the module transmits pictures to the computer browser by WiFi. Features Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module low-power dual-core 32-bit CPU for application processors Up to 240MHz, up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Supports for OV2640 and OV7670 cameras with built-in flash Supports for images WiFI upload Supports TF cards Supports multiple sleep modes Embedded Lwip and FreeRTOS Supports STA/AP/STA+AP working mode Supports Smart Config/AirKiss One-click distribution network Supports for serial local upgrade and remote firmware upgrade (FOTA) Supports secondary development Note: This product contains the OV2640 camera module. If you need to use the OV7670 camera, please purchase it separately. Package Included: 1 x ESP32-CAM Module 1 x Camera Module OV2640 2MP