MiterSet Segments For Table Saws

Description Specifications MiterSet Segments is a category of miter gauge jig that quickly and easily sets your miter gauge to precise angles for cutting perfect wood segments. MiterSet Segments consists of a laser-etched, anodized aluminum plate bisected by a miter gauge slot. It has hole patterns for left and right angles which are set using two tapered pins. The numbers on both the left and right plate sectors represents the number of segments that you wish to cut for your wood project. Slide your miter gauge into the miter slot. Place one pin at the zero position and the other pin in the hole next to the number of segments you wish to cut. Slide your miter gauge up to the pins and lock it down. The precise angle is automatically transferred to your miter gauge. Includes: Aluminum MiterSet plate 2 tapered pins 2 mm neoprene rubber backing Protective plastic carry case This product fits all standard miter slots measuring .75" wide. All components are proudly Made in the USA. MiterSet is CNC milled from a solid aluminum billet. Hole placement is accurate to 1/1000th of an inch yielding beautiful, tight joints for up to 20* wood segments. No gaps. No sanding. No wasted material. MiterSet is put through an electronic anodizing process to protect the product from oxidation. The hole numbers are laser-etched for years of readability. The 2 mm neoprene rubber backer keeps the MiterSet firmly on a flat surface for easy use. The foam-filled plastic case protects MiterSet between uses. 5.875 X 5.875 X .625 Product weight 2 lbs Shipping weight 3.95 lbs 25-year product lifetime warranty MiterSet is guaranteed to be accurate for the full life of the product. Segment Angle Chart: 4 segments 45° angle 5 segments 36° angle 6 segments 30° angle 7 segments 25.714° angle 8 segments 22.5° angle 9 segments 20° angle 10 segments 18° angle 11 segments 16.364° angle 12 segments 15° angle 13 segments 13.846° angle 14 segments 12.857° angle 15 segments 12° angle 16 segments 11.25° angle 17 segments 10.588° angle 18 segments 10° angle 20 segments 9° angle MiterSet is meant to be used with standard miter gauges that require a .75" miter slot. MiterSet may not work (with out adjustments) with some of the large precision gauges from Incra and Kreg. MiterSet also is not compatible with table saws that have an inverted T-shape miter gauge bar (e.g., the Dewalt 745 and 748 contractor table saws) because the inverted T-shape miter gauge bar will not fit snugly in the miter slot in the plates. In order to use MiterSet with table saws that have such miter gauges, you must get an off-the-shelf miter gauge for your saw that has a flat bottom miter gauge bar. This MiterSet jig is not configured to support Shopsmith. You can purchase the Shopsmith version of MiterSet directly at www.shopsmith.com. * MiterSet Segments has no number or angle setting for 19 segments.