1200°C 5" Atmosphere Controlled Automatic Tube Furnace with Quenching Functions - OTF1200XS5-ASDC

OTF1200XS5-ASDC is an automatic 5" OD tube furnace with a quenching function. It automates the vacuum sealing, purging, heating, and quenching in a sequence with one click on a laptop. Full automation can also be realized via a robot for multi-furnace systems, including remote control, data logging, sample loading/unloading, and quenching. The maximum working temperature is 1200°C. SPECIFICATIONS: Furnace High-purity Al2O3 fibrous insulation with Max. energy saving 350 mm length heating chamber with Constant temperature zone 120 mm with +/- 5°C PID programmable temperature controller with +/- 1°C accuracy Max working temperature: 1200oC @ < 1 hr, and 1100ºC continuous 5" quartz tube (130mm O.D x 120mm I.D x 700mmL) is included The pressure sensor is built in to control chamber pressure automatically A moving quenching tank is built for cooling of water, oil, and sand Airtight Flanges and Sliding 5" Dia. Water-cooled stainless steel flange with silicone O-ring and valves for airtight heat treatment The right-side flange will be driven by a motor for closing or opening A Digital pressure sensor is built in to control pressure from 1 Pa to 200 kPa automatically Max. The vacuum level is dependent on the vacuum pump. One rotary vacuum pump is included, which can reach a 10 Pa vacuum. Sample Stage The quartz sample stage with dimension of W 32 mm x L 170 mm The sample stage is installed with a baffle and a sliding flange on the right side The sample stage can be flipped for quenching Control Panel & Software One laptop programs all parameters, including Chamber pressure ( 1-200 kPa) Gas flow rate ( 0 - 2000ml/minute ) Purging cycles ( 0 - 3 times ) Temperature program ( heating rate, dwell time, and cooling rate ) up to 30 segments The flange closes/opens Sample stage rotates for quenching the sample into the cooling tank Communication code is provided to the existing customer to connect the device to robots for unmanned operation Optional One computer can operate multi-furnace Full automation with sample loading is optional via integration with a robot arm. The furnace can be integrated with mixing and pressing machines to achieve an automated sintering process Utility requirement Power supply; 220VAC +/- 10%, 6KW, ( 40A breaker ) single-phase , 50/60 Hz > 16 ml/min recirculating water is required for cooling the vacuum flange. Not included。 If there is no cooling water source in your lab, please order the recirculating water chiller from us. Inert gas tank and regulator are required Compliance and Warranty NRTL or CSA certification is available upon request at an extra cost. One year limited warranty, not including the quartz tube and fragile parts