CHEM LINK M-1® Universal Adhesive & Sealant | Waterproof Construction Adhesive

CHEM LINK by SOPREMA · Made in the USA M-1® Universal Adhesive & Sealant High-strength, flexible, waterproof construction adhesive and sealant for roofing, concrete, metal, wood and masonry. CHEM LINK M-1 is a professional-grade, moisture-curing structural adhesive and sealant. Its silyl-terminated polyether (STPE) technology combines strong adhesion with the flexibility to create a tough, elastic waterproof seal on a wide range of compatible building materials. 100% SolidsNon-SagLow VOCUV StableASTM C920 Class 35 Why choose M-1? Professional Construction Adhesive & Sealant Benefits High-Strength Adhesion 370 psi tensile strength and 390 psi shear strength in the manufacturer's laboratory testing. Waterproof Seal Forms a tough, elastic waterproof seal for properly prepared, compatible construction materials. Flexible Joint Movement ASTM C920 Class 35 performance and SWRI validation for ±35% joint movement. Multi-Surface Bonding Adheres to compatible concrete, brick, wood, glass, aluminum, metal and roofing materials. Low-Odor & Solvent-Free 100% solids, VOC content below 24 g/L, and formulated without isocyanates. Easy to Apply Non-sag formula for vertical or overhead work; paintable after 24 hours. Published performance M-1 Technical Performance at a Glance Manufacturer laboratory values help contractors, architects, specifiers and purchasing teams evaluate M-1 for a project. 370 psiTensile strength 390 psiShear strength 525%Elongation at break ±35%Validated joint movement Construction applications Where Can CHEM LINK M-1 Be Used? M-1 is designed for bonding and sealing compatible materials in commercial, industrial and residential construction. Roofing & Waterproofing For compatible roof flashing, copings, skylights, HVAC surfaces and roofing materials. TPO membranes require the specified primer; EPDM requires adhesion testing. Concrete & Masonry For bonding and sealing compatible concrete, brick and block surfaces, including joints that require flexible waterproof sealing. Metal, Aluminum & HVAC For properly prepared galvanized metal, aluminum, brass and copper used in flashing, coping and HVAC construction details. Wood & General Construction For compatible clean, sound, dry wood and general building materials. Do not use on fire-retardant lumber. CHEM LINK M-1 Technical Specifications Specification Manufacturer data Manufacturer CHEM LINK by SOPREMA Product chemistry Silyl-terminated polyether (STPE) Cure mechanism Moisture-curing VOC content Less than 24 g/L Tensile strength 370 psi (2,550 kPa) Shear strength 390 psi (2,690 kPa) Elongation at break 525% Shore A hardness 45 Joint movement ASTM C920 Class 35; SWRI validated ±35% Skin-over time Approximately 20 minutes (sell sheet) Tack-free time 35 ± 10 minutes at stated test conditions Typical full cure Within 24 hours; varies with conditions and bead depth Minimum application temperature 32°F (0°C) Service temperature -40°F to 200°F (approximately -40°C to 93°C) Paintable After 24 hours (verify coating compatibility) Fire classification ASTM E84 Class A Manufactured in USA Compatible Substrates Concrete, brick and block masonry Wood and glass Aluminum and galvanized metal Brass, copper and engineered plastics PVC, SBS and APP-modified bitumen roofing materials EPDM roofing membranes — adhesion testing required TPO roofing membranes — specialized primer required Important Surface Preparation Notes Remove contamination, frost, rust, loose material and standing water before sealing. Test adhesion to confirm compatibility with the application. TPO: CHEM LINK specifies LOW-VOC EPDM/TPO Primer F1280 LVOC. Wood: Do not use on fire-retardant lumber. Allow treated lumber to weather for six months, following manufacturer guidance. Concrete: Remove release agents, loose concrete and visible standing water before applying. Installer guidance How to Apply M-1 Universal Adhesive & Sealant 1 Prepare the surfaceRemove dust, oils, rust, frost, standing water and incompatible coatings; follow substrate-specific preparation guidance. 2 Verify adhesion and primer needsTest substrate adhesion where needed. Use CHEM LINK F1280 LVOC primer for TPO roofing membrane. 3 Prepare the cartridgeCut the nozzle and use a professional-grade 26:1 high-thrust caulking gun for cartridges. 4 Apply a continuous beadGun the sealant smoothly onto the prepared substrate. 5 Tool within 15 minutesFinish the bead to promote proper attachment and a uniform seal. 6 Protect while curingTypical full cure is within 24 hours, depending on bead depth, temperature and humidity. Prevent movement and debris until cured. These are condensed instructions. Consult the full CHEM LINK Sealant Application Technical Bulletin before installation. Performance Standards & Technical Documentation Published Standards ASTM C920, Type S, Grade NS, Class 35 ASTM E84, Class A ASTM D4586 — meets or exceeds SWRI validated Federal TT-S-00230-C Type II, Class B Canadian Standards Board CAN 19, 13-M82 Manufacturer PDF Downloads Access the official manufacturer documentation for M-1, including product specifications, application guidance, VOC emissions testing and safety information. All documents open in a new tab. M-1 Technical Data Sheet ↗ M-1 Sell Sheet ↗ VOC Emission Test Certificate ↗ Safety Data Sheet (English) ↗ Fiche de données de sécurité (Français – Canada) ↗ The supplied manufacturer data sheet also references Miami-Dade NOA 19-0709.02 and Florida Building Code FL9779; verify current approval status, validity and project applicability. The referenced product data sheet is scoped to products sold in the U.S. market. Contractors · Builders · Procurement teams Need M-1 for a Commercial Construction Project? Review CHEM LINK's technical documentation and contact ComposiGrip about product availability, order quantities and project requirements. Specify your required cartridge or packaging format and colour when enquiring. Contact ComposiGrip ↗Browse ComposiGrip ↗ M-1 product and application FAQ Frequently Asked Questions About CHEM LINK M-1 Technical answers for contractors, roofers, building owners, estimators and construction purchasing teams. What is CHEM LINK M-1 used for? M-1 is a moisture-curing structural adhesive and waterproof sealant used to bond and seal compatible concrete, masonry, wood, metal, glass, roofing materials, skylights, flashing, copings and HVAC surfaces. Is CHEM LINK M-1 waterproof? Yes. When correctly applied to compatible, properly prepared surfaces, M-1 forms a tough, elastic waterproof seal. Is M-1 a silicone or polyurethane sealant? Neither. M-1 is based on silyl-terminated polyether (STPE) technology and is formulated without isocyanates. Can M-1 be applied to damp surfaces? The manufacturer states that M-1 can be applied under suitable wet and dry conditions. Prepare the substrate correctly and remove visible standing water before application. How long does CHEM LINK M-1 take to cure? Full cure is typically reached within 24 hours, but humidity, temperature and bead depth affect the actual time. The sell sheet lists approximately 20 minutes for skin-over. Can M-1 be used on concrete? Yes. M-1 is compatible with properly prepared concrete and masonry. Remove release agents, loose material and standing water, and confirm adhesion for the project. Does M-1 require a primer? Most applications do not require a primer. However, TPO roofing membranes require CHEM LINK LOW-VOC EPDM/TPO Primer F1280 LVOC, and EPDM requires adhesion testing. Can CHEM LINK M-1 be painted? Yes. It may be painted after 24 hours, subject to compatibility of the coating. Is M-1 suitable for outdoor use? Yes. M-1 is UV-stable and designed for compatible exterior bonding and sealing applications, with a published service temperature range of approximately -40°F to 200°F. Is M-1 solvent-free and low-VOC? Yes. It is a solvent-free, 100% solids formulation with published VOC content below 24 g/L and contains no isocyanates. Is M-1 used in commercial construction? M-1 is intended for professional construction bonding and sealing. The manufacturer reports ASTM C920 Class 35 performance, ASTM E84 Class A classification and SWRI validation. Confirm suitability for project specifications. Buy CHEM LINK M-1 Universal Adhesive & Sealant Choose M-1 for high-strength bonding and flexible, waterproof sealing across compatible commercial, residential and industrial building materials. Select your available product variant above and review the manufacturer's technical documents before installation. Brand: CHEM LINK by SOPREMA · Product: M-1 Universal Adhesive & Sealant · Made in USA