SINET™ Motor Cable

Overview The E-BikeKit SINET™ Motor Cable connects the hub motor directly to the controller using matched waterproof connectors. This is the standard 67″ motor cable used throughout current E-BikeKit SINET™ conversion systems and complete electric trike systems. 67″ overall cable length 10.4 mm waterproof connector on both ends 9-pin motor connection Factory-terminated phase and hall wiring Molded, weather-resistant connectors No variants or connector options Compatibility Note: This cable is standard equipment for current SINET™ systems, but it may also be used with certain previous-generation E-BikeKit systems that use the same 10.4 mm, 9-pin connector on both the controller and motor sides. It is not compatible with many Legacy direct-drive motor systems, which commonly use a larger motor-side connector, an 8-pin connection, or a different wiring configuration. Description The SINET™ Motor Cable provides the electrical connection between the E-BikeKit controller and compatible hub motor. Both ends use the same 10.4 mm, 9-pin waterproof connector, with the internal phase and hall wiring factory-terminated for the matching E-BikeKit motor and controller architecture. The molded waterproof connectors help protect the electrical connection from normal outdoor riding conditions while simplifying installation and service. If you are replacing a cable on an older E-BikeKit system, do not order based on appearance alone. Confirm the connector diameter, pin count, cable length, and motor type before ordering. Connections Controller Side: 10.4 mm waterproof 9-pin connector Motor Side: 10.4 mm waterproof 9-pin connector Cable Length: 67″ Internal Wiring: Factory phase and hall wiring Connector Style: Molded weather-resistant plugs Both ends use the same 10.4 mm, 9-pin connector. Compatibility Compatible With: Current E-BikeKit SINET™ conversion systems Current E-BikeKit SINET™ complete trike systems SINET™ Integrated Controllers SINET™ External Controllers Current SINET™ hub motors using the 10.4 mm, 9-pin connector Compatible Legacy E-BikeKit systems using 10.4 mm, 9-pin connectors on both the controller and motor sides Not Compatible With: Legacy E-BikeKit systems using incompatible direct-drive motor connections Motors using a 14.7 mm motor-side connector Legacy 8-pin motor connections Systems using different pin assignments or internal wiring Third-party electrical systems unless compatibility has been confirmed Matching connector appearance alone does not guarantee compatibility. Always compare the connector diameter, pin count, cable length, and motor type with the existing system before ordering. Specifications Brand: E-BikeKit Platform: SINET™ Cable Type: Motor-to-controller cable Cable Length: 67″ Controller Connector: 10.4 mm waterproof 9-pin Motor Connector: 10.4 mm waterproof 9-pin Connector Construction: Molded, weather-resistant Internal Wiring: Factory phase and hall wiring Variants: None What’s Included One 67″ SINET™ Motor Cable Factory-installed 10.4 mm, 9-pin waterproof connectors on both ends Installation Notes Disconnect the battery before installation Verify the motor and controller both use 10.4 mm, 9-pin connectors Align connector arrows and pins before joining the plugs Do not twist, force, or partially connect the plugs Push connectors together fully to the indicated insertion line Route the cable away from moving parts, steering pivots, tires, chains, and sharp edges Secure the cable with appropriate cable ties without placing strain on the connectors After installation, verify normal motor operation before returning the bike or trike to service. Support Replacing a motor cable on an older E-BikeKit system? Contact us before ordering if you are unsure which connector version you have. Clear photos of the controller-side connector, motor-side connector, and motor are usually enough for us to help identify the correct cable. Questions? Call us toll-free at 1-866-882-3245, Monday–Friday, 9am–5pm ET, or email support@ebikekit.com.