VW Golf Mk6 GTI Front Lip

Fits the VW Golf Mk6 GTI/GTD, 2008–2012 — GTI bumper. The GTI bumper on the Golf Mk6 GTI stops short of where it should. This lip closes that gap: gloss black out of the box, fixed with screws into the underside of the bumper — no tape — and nothing is cut. Moulded for the GTI bumper specifically, not a universal strip trimmed to fit Gloss black finish — no paint, no bodyshop, no colour match to get wrong Vacuum-formed plastic: flexes over a knock instead of cracking like fibreglass Screw-fixed only — no tape to let go in the cold, and it comes off cleanly if the car ever goes back to standard Screws go into the plastic bumper only — the bodywork is never drilled Will it fit your Golf? Model Years Fits Golf Mk6 GTI — GTI bumper 2008–2012 Yes — this listing Other Golf bumpers 2008–2012 No — different lower bumper Specification Material Vacuum-formed plastic Finish Gloss black, ready to fit Pieces 1 Fixing Self-tapping screws into the underside of the bumper — no tape Fitting time About an hour Supplied as One piece, protective film applied Fitting it Clean the underside of the bumper. Dry fit the lip and check the gap at both ends before you drill anything — a bumper that has been off the car before rarely sits square. Mark the screw positions, pilot-drill the bumper plastic only, and screw the lip up from below with the self-tappers. Leave the protective film on until the last screw is in. Or bring it to us — we fit these in Portadown and warrant the fit. Straight from us We fit these in the unit in Portadown. Screws only, no tape — it holds in the cold and it comes off cleanly if you ever sell the car standard. Dry fit before you drill: a bumper that has been off the car before rarely sits square, and the gap you set on the bench is the gap you get on the road. It will not hide a damaged bumper. The lip sits below the bumper; a scuff above it still shows. It is not injection-moulded ABS. Vacuum-formed plastic is lighter and more forgiving on impact, but it is thinner, and it is not a structural part. Frequently asked questions Does the Golf Mk6 GTI front lip need painting? No. It is supplied in gloss black and goes straight on the car. Do you have to drill the bumper to fit a front lip? Yes — small pilot holes in the plastic underside of the bumper, never in bodywork or paint. The screws are hidden behind the lip once it is on. No tape is used, so the lip can be removed and refitted cleanly. Will it survive speed bumps? On a standard-height Golf Mk6 GTI, yes. On coilovers at fully dropped it will make contact — approach at an angle. Also for this car: VW Golf Mk6 Sport Style Rear Roof Spoiler · VW Golf Mk6 Mirror Covers. See the rest of the VW Golf Mk6 styling range.