ALINX AXW22: Xilinx Zynq UltraScale+ RFSoC XCZU47DR FPGA Development Board

Features What's Included Resources & Downloads Description AMD Zynq™ UltraScale+™ RFSoCs - The Industry’s Only Single-Chip Adaptable Radio Platform AMD Zynq™ UltraScale+™ RFSoC Gen 3: Quad-core Arm Cortex-A53 MPCore up to 1.33 GHz Dual-core Arm Cortex-R5F MPCore up to 533 MHz 16nm FinFET+ Programmable Logic Soft-decision forward error-correction cores (SD-FEC) Source: https://www.amd.com/en/products/adaptive-socs-and-fpgas/soc/zynq-ultrascale-plus-rfsoc.html AXW22 is a Compact SDR board with XCZU47DR FPGA, equipped with 2×14-bit 5GSPS RF-ADCs, 2×14-bit 9.85GSPS RF-DACs, 6GB DDR4, 1× QSFP+, 1× SFP+, GPS, 4× M.2, 2T2R RF SMA ports, built for direct RF processing. Ideal for 5G, Radar, Satellite, and Wideband. Ideal for: 5G and LTE Wireless Remote-PHY for Cable Access DOCSIS 3.1 Phased Array Radar/Digital Array RADAR Test & Measurement Satellite Communications This is a single board design. Also check out our AXW49 with XCZU49DR. FPGA Specification (RFSoc) FPGA XCZU47DR-2FFVE1156I 14-bit RF-ADC w/DDC 8x, Max Rate (GSPS) 5.0 14-bit RF-DAC w/DUC 8x, Max Rate (GSPS) 9.85 Number of DDCs per RF-ADC 1 RF input Freq max. GHz 6 Decimation / Interpolation 1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x, 16x, 20x, 24x, 40x Processors 4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5F, 533MHz High-Speed Connectivity 4 PS-GTR; PCIe Gen1/2; Serial ATA 3.1; DisplayPort™ 1.2a; USB 3.0; SGMII General Connectivity 214 PS I/O; UART; CAN; USB 2.0; I2C; SPI; 32b GPIO; Real Time Clock; Watchdog Timers; Triple Timer Counters GTY 16x Chip Level Industrial Grade Speed Grade -2 Working Temperature -40℃~85℃ System Logic Cells (K) 930 CLB LUTs (K) 425 Max. Dist. RAM (Mb) 13.0 Total Block RAM (Mb) 38.0 UltraRAM (Mb) 22.5 DSP Slices 4,272 1.8V High-Performance (HP) I/Os 104 3.3V High-Density (HD) I/O 48 Board Features DDR4 PS: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps PL: 2x 1GB DDR4, total 2GB, 32bit Bus, Data Rate 2400Mbps QSPI FLASH 2x 1024Mbit, for user data storage 40G QSFP+ 1x 10G SFP+ 1x GPS 1x NEO-M8N RS232 1x GPIO 36x via 1x 40-pin 2.0mm socket (J8) SPI / GPIO 1x SPI, 1x GPIO via J30J connector (J9) JTAG 1x 14-pin 2.0mm Standard JTAG, or 1x Type-C (J3) via FT4232HL, for Programs Debug and Download Ethernet Interface 1x 10/100/1000M Ethernet with RJ45 for data exchange Active Crystal Oscillator 1x Single-ended 33.3333MHz provide PS Clock 1x LMK04828 for the PL Logic, DDR Reference, GTY EEPROM 1x M24C08-RDW6TP 8Kb with IIC SD Card Slot 1 micro SD Card Slot, support SD Mode and SPI Mode Real Time Clock 1x Built-in RTC LEDs 4x STATUS, POWER, 8x User Push-Buttons 2x Power Supply Voltage Input: +12 V DC, Barrel plug 2.5 x 5.5 mm Current Input: Max. Current 8.5 A What's Included FPGA Board 1 DC Fan (installed) 2 SMA cable 4x 12V Power Adapter 1 set SD Card 1x 32GB SD Card Reader 1 Dimensions Dimension 180.00 mm x 135.00 mm PCB Independent GND and Power Layers Resources & Downloads AXW22 User Manual (PDF, Simplified Chinese) Full documentation including Schematics, Demo projects (if applicable) will be provided by CodeRobin.