Wakespeed WS500 Pro + Victron Cerbo GX 48V Control Kit

Complete monitoring and connection kit for the EGON DC-Hub 48V. This kit provides the control, monitoring and communication components required to support the EGON 48V system architecture. TO BUILD an operational 48V system you will need the following products. In this list, only the alternator and battery are optional should you prefer to source them elsewhere. Other branded DC-DC converters or alternator controllers are NOT compatible with the Egon 48V hub. Egon 48V Hub. BUY NOW 48V Alternator. SELECT ONE HERE 48V DC-DC Converter. YOU'LL NEED TWO Alternator Control kit. BUY NOW 48V battery. BUY NOW What's Included here: - Wakespeed WS500 regulator - Victron Cerbo GX - Touch 50 display - Wakespeed P Type Harness - CAN connector cable, 2 metre - CAN terminators - Wakespeed temperature sender cable, 8 metre Available for Australian orders only. International customers, please contact support@egon.com.au before ordering. The Wakespeed Alternator Controller is an essential part of the EGON 48V architecture. It enables control overe the alternator, neccessary for the regulation of current output and temperature. What Wakespeed says: The WS500 is the only alternator regulator available that can utilize current, voltage and temperature to deliver the most precise and effective charging possible for 12V, 24V and 48V battery systems – with configurability for voltages in between – making it the perfect solution for charging lead acid based, or new generation LiFePO4 lithium-ion battery banks. Part of the EGON 48V System This alternator controller is designed as part of the EGON 48V system. If you are planning a full 48V setup, review the EGON DC-Hub 48V page and related system components before ordering. The Victron Cerbo GX is the central control hub for the EGON 48V architecture, and is required to configure charge rates of the system and for battery and charge monitoring. These can be controlled on the supplied screen and using thew Victron App for mobile devices. Configuration information is supplied. Overview The EGON 48V Certified 105Ah LiFePO4 Battery is a 48V system battery designed for use within the EGON 48V architecture. This unit includes Bluetooth, data communications, active balancing, and communication cables. Wakespeed measurements: 189mm x 134mm x 51mm Shipping & Availability This product is currently available for Australian orders only. International customers should contact support@egon.com.au before ordering so EGON can confirm product availability, freight options and suitability for their 48V system. Related 48V System Components This battery is one part of the EGON 48V system. You may also need the following components depending on your setup: EGON DC-Hub 48V EGON 48V Battery EGON 48V DC/DC Converters 48V Alternators What Victron says: The Cerbo GX is a flexible communication centre that will take remote monitoring to the next level. With all the hardware connection possibilities to fit your every need. The Cerbo GX enables you to monitor and control your system from anywhere, at any time. It is designed to be a versatile centerpiece that seamlessly connects to your other Victron connected products and supported third party devices. Master remote systems with real-time monitoring, historical analysis, remote access and control with the Victron Remote Monitoring (VRM) portal and VictronConnect app. Or simply connect a GX Touch display for direct control. With plenty of possibilities, the Cerbo GX puts the power in your hands.