Prusament PC Space Grade Black 850g (NFC)

About PC Space Grade Black Prusament PC Space Grade Black is a material developed for the space industry and particle physics applications. Its main advantages are its ESD-safe properties and very low outgassing. Plus, its affordable price and ease of printing on common desktop printers make it something unique in this industry. Due to its excellent ESD properties and compatibility with desktop 3D printers, it’s suitable not only for parts exposed to outer space but also for advanced personal projects, such as housings for electronic devices and more. High-end material accessible to everyone Our goal was to create a professional, yet affordable material that would make prototyping and manufacturing space components easier. Until now, only costly materials like PEEK, PEKK and PEI with ESD-safe properties were suitable in this field. All of these materials require highly expensive industrial printers. Prusament PC Space Grade Black can be printed on most Prusa 3D printers, which significantly reduces the final price of manufactured components and greatly increases accessibility for everyone. Electrostatic dissipation properties (ESD) One of the main characteristics necessary for use in space components is electrostatic dissipation. This quality is important not only for space engineers but also for anyone who works with electronic devices. In hobby use, the ESD-safe materials can be used for making custom PC cases and similar products. The measured resistance of dissipative materials ranges between 104 and 1011 Ohms. Ohms. Anything with higher resistance is considered insulating and anything with lower values is considered conductive material. We have measured both the volume and surface resistivity of 3D printed samples from Prusament PC Space Grade Black, and the results confirmed the highly dissipative nature of the material. The volume resistivity was measured at 2.2×10 4 Ω⋅m, while the surface resistivity was 6×107 Ω/sq. These exceptional values were obtained directly from the 3D printed samples, without any post-processing, such as annealing or sanding, which is a testament to the filament's inherent and consistent ESD performance. This demonstrates that parts can be printed and immediately put into use for a wide range of applications requiring reliable electrostatic dissipation. Outgassing Various residual monomers or products of polymer degradation are released from the polymers under vacuum. This can affect, or even damage, the electronics used on the satellite (or any other precise machinery). Released gases can contaminate optical devices or cause inaccurate measurements of precise sensors. And finally, the gas release itself can decrease the material’s physical and mechanical properties. Manufacturing thermoplastic polymers with low outgassing levels is a great challenge, and it is usually achieved in expensive industrial-grade materials, such as PEKK and PEEK. We were able to fulfil strict requirements defined by the European Space Agency using PC (polycarbonate), which is a relatively cheap, common, and easy-to-print material. Measured outgassing values: TML (Total Mass Loss): The mass loss is represented as a percentage. The ESA limit is 1%; Prusament PC Space Grade Black achieved 0.25%. CVCM (Collected Volatile Condensable Material): The limit stated by ESA is less than 0.1 %; the Prusament PC Space Grade Black reached a perfect 0.00 %. RML (Recovered Mass Loss): The maximum limit stated by ESA is 1.0 %; the Prusament PC Space Grade Black reached 0.12 %. You can examine the results and the used methods in our announcement article and the test report issued by Aerospace & Advanced Composites GmbH.