MHC+ Recaro SR2 & SR3 Satin Pre Preg Carbon Fibre Seat Harness Pass Through Inlays Set

Add a subtle genuine carbon fibre detail to your Recaro SR2 or Recaro SR3 seats with the MHC+ Satin Pre-Preg Carbon Fibre Harness Pass-Through Inlays. Designed specifically around the harness openings in the SR2 and SR3 seat backs, these precision-fit inlays sit over the existing pass-through sections to introduce genuine 2x2 pre-preg carbon fibre without permanently modifying the seats themselves. Rather than creating an obviously aftermarket appearance, each inlay is cured to closely follow the original profile and contour of the Recaro harness pass-through. This allows the carbon component to sit flush against the existing surface rather than standing excessively proud of the seat. A satin lacquer finish has been deliberately chosen in place of high-gloss carbon. The lower-sheen surface better complements the surrounding materials found on period Recaro seats and the interiors in which SR2 and SR3 seats are commonly installed. It also helps reduce the appearance of fingerprints and light handling marks. Installation uses automotive-grade adhesive-backed tape, with no drilling, cutting or permanent alteration of the seat required. The original Recaro remains untouched underneath, making this an ideal carbon fibre upgrade for highly original cars and valuable period seats. Key Features Designed specifically for Recaro SR2 and SR3 seats Fits the harness pass-through sections Supplied as a complete inlay set Genuine pre-preg carbon fibre 2x2 carbon fibre weave Premium satin lacquer finish Precision-shaped to follow the original Recaro contours Designed to sit flush against the existing pass-through Lower-sheen appearance complements period interiors Helps disguise fingerprints and light handling marks Stick-on installation using automotive-grade adhesive-backed tape No drilling or cutting required No permanent seat modification Original seat remains unchanged underneath Common fitment across Recaro SR2 and SR3 MHC+ fitment guarantee 3-year warranty Designed Specifically for Recaro SR2 & SR3 Seats The MHC+ harness inlays have been developed specifically around the Recaro SR2 and SR3, rather than being adapted from a universal carbon fibre component. Fitment is common across both seat types, allowing the same inlay design to follow the harness pass-through profile found on compatible SR2 and SR3 seats. The harness openings are one of the most distinctive and visible areas of these classic Recaro designs. Adding carbon fibre here introduces a noticeable material change without covering the seat itself or detracting from its original shape. Genuine Pre-Preg Carbon Fibre Each MHC+ Recaro harness inlay is manufactured from pre-preg carbon fibre with a classic 2x2 weave. Pre-preg construction uses carbon material that has already been impregnated with a controlled quantity of resin before the component is cured. This production method allows greater control over the finished component and is particularly well suited to smaller precision-fit carbon parts where profile and surface quality are important. The result is a genuine carbon fibre component rather than a printed carbon-effect finish or conventional plastic accessory. Precision-Fit Harness Pass-Through Inlays Fit is particularly important on a component positioned directly against the existing seat. Each inlay is formed to the profile of the Recaro harness pass-through, allowing it to follow the original contours and sit neatly against the surrounding surface. Rather than appearing like a bulky accessory attached on top of the seat, the intention is for the carbon fibre to read as a carefully integrated detail that works with the original Recaro design. This makes the MHC+ inlays particularly well suited to period Japanese performance cars where retaining the character of the original interior is important. Satin Carbon Fibre Finish MHC+ has deliberately specified a satin lacquer rather than the high-gloss finish commonly used on modern carbon fibre interior components. The lower-sheen finish is better suited to the materials and textures typically surrounding Recaro SR2 and SR3 seats. It allows the carbon weave to remain clearly visible without creating the highly reflective appearance associated with many contemporary carbon fibre upgrades. The satin surface also has a practical advantage, helping to disguise fingerprints and minor marks caused by normal handling. For owners building a period-correct or sympathetically modified interior, the result is a carbon fibre detail that feels much more appropriate to the age and design of the seat. No Drilling or Permanent Seat Modification Installation is straightforward and completely avoids permanent modification to the Recaro seat. The inlays attach using automotive-grade adhesive-backed tape applied to a properly cleaned and prepared surface. There is: No drilling No cutting No modification to the seat structure No requirement to remove or disturb the original pass-through No permanent alteration to the Recaro seat underneath This is especially important with desirable original Recaro SR2 and SR3 seats, where owners may not want to permanently modify increasingly valuable interior components. Ideal for Period Japanese Performance Cars The Recaro SR2 and SR3 became closely associated with some of the most desirable Japanese performance cars of the 1990s and early 2000s. Compatible applications can include Recaro SR2/SR3 seats found in or associated with vehicles such as: Toyota JZA80 Supra RZ Honda DC2 Integra Type R Honda EK9 Civic Type R Mitsubishi Lancer Evolution models with compatible Recaro SR2/SR3 seats The inlays are ultimately designed around the Recaro seat rather than the vehicle itself, so compatibility should be determined by confirming that your car is fitted with the appropriate SR2 or SR3 seat and harness pass-through design. This also makes the set suitable for compatible SR2/SR3 seats that have been retrofitted into other vehicles. Recaro SR2 & SR3 Compatibility Designed for: Recaro SR2 Recaro SR3 Common vehicle applications include: Toyota Supra JZA80 / A80 with compatible Recaro SR2/SR3 seats Honda Integra Type R DC2 with compatible Recaro seats Honda Civic Type R EK9 with compatible Recaro seats Mitsubishi Lancer Evolution models with compatible Recaro SR2/SR3 seats Other vehicles with genuine compatible Recaro SR2 or SR3 seats Important: Fitment is based on the seat type, not simply the vehicle model. Cars may have had their original seats changed during their lifetime, so please confirm that your seats are compatible Recaro SR2 or SR3 units before ordering. Product Specifications Manufacturer: MHC+ Product: Harness Pass-Through Inlay Set Seat Compatibility: Recaro SR2 / Recaro SR3 Material: Pre-Preg Carbon Fibre Weave: 2x2 Finish: Satin Installation: Automotive-Grade Adhesive-Backed Tape Drilling Required: No Permanent Modification Required: No Warranty: 3 Years Fitment Guarantee: Yes Preserve the Original Recaro Seats Original Recaro SR2 and SR3 seats have become increasingly desirable, particularly when fitted to iconic Japanese performance cars. For that reason, permanently cutting, drilling or modifying an original seat isn't always desirable. The MHC+ inlays provide a way to introduce genuine carbon fibre while keeping the original seat intact underneath. Installation doesn't require structural alteration or removal of the existing harness pass-through sections. For owners who want to personalise their interior while respecting the original Recaro design, this makes the inlays a particularly attractive solution. Why Choose MHC+? MHC+ carbon fibre components are developed with a strong focus on material quality, accurate fitment and clean integration with the original vehicle or component. These Recaro SR2/SR3 harness inlays combine: Premium pre-preg carbon fibre construction Classic 2x2 weave Period-appropriate satin finish Precision-fit profile Non-destructive installation MHC+ fitment guarantee 3-year warranty Rather than dramatically changing the appearance of the Recaro seat, the inlays add a carefully considered carbon fibre detail to one of its most recognisable features. Why Buy From R44 Performance? R44 Performance offers a growing range of MHC+ pre-preg carbon fibre components and premium styling upgrades for enthusiast and performance vehicles. When you purchase your MHC+ Recaro SR2 & SR3 Carbon Fibre Harness Pass-Through Inlays from R44 Performance, you'll benefit from: Genuine MHC+ product Premium pre-preg carbon fibre construction 3-year warranty Fitment guarantee Secure packaging for carbon fibre components Fast UK and worldwide shipping Dedicated customer support before and after purchase For owners of Recaro SR2 or SR3 seats looking for a subtle carbon fibre upgrade, the MHC+ Satin Pre-Preg Carbon Fibre Harness Pass-Through Inlays combine genuine 2x2 carbon construction, a period-appropriate satin finish and straightforward non-destructive installation while preserving the original seat underneath.