Vessel 9008EVA MEGADORA JAWSFIT Screwdriver 8-Piece Set (9008EVA)

Key Features JAWSFIT Tip Bites Into the Screw A black-point JAWSFIT tip profile grips the screw head more aggressively than a standard Phillips or slotted tip, reducing cam-out under torque. Chrome Vanadium Steel Shank Shanks are forged from chrome vanadium steel and heat-treated using the same material process behind Vessel's Tatara-forged blades, for a driver that holds up under repeated torque. Knurled Shank & Hex Grip A knurled shank section speeds up quick hand-turning, while cushioned hexagonal cross-section corners on the handle keep the driver from rolling off a bench and add wrenching purchase. Overview This is an 8-piece screwdriver set covering both slotted and Phillips fasteners for general and stubby-reach work. The Vessel 9008EVA Megadora JAWSFIT Screwdriver 8-Piece Set combines six full-length No. 900 drivers with two No. 920 stubby drivers, giving you slotted and Phillips coverage in both standard and tight-clearance formats from a single case. Every driver in the set uses Vessel's JAWSFIT tip design — a black-point tip profile the manufacturer describes as "biting into the screw" to reduce cam-out compared with a standard stamped tip, particularly useful on worn or painted-over screw heads where a normal driver tends to slip. Shanks are chrome vanadium steel, and a knurled section near the tip is built specifically for quick hand-spinning when you're running a screw down before final torque. Handle construction carries Vessel's cushioned hexagonal cross-section design: the flat corners resist rolling on a sloped or angled work surface and give you a little extra wrenching leverage with your palm on stubborn fasteners, without needing a separate bolster. Vessel also ties the blade steel to its Tatara heritage — a traditional Japanese iron-forging process the company has used since its 1916 founding, applied to the hardened steel in these blades. Two of the eight drivers are No. 920 stubby-length screwdrivers (a 1-in. slotted and a 1-in. Phillips), useful for driving screws in tight clearances behind panels, in cabinets, or under dash and engine-bay components where a full-length driver won't fit. This set suits anyone who wants full slotted-and-Phillips coverage plus a stubby option in one case — general maintenance, electrical work, appliance repair, and automotive tasks where clearance and screw condition both come into play. Slotted and Phillips, Full-Length and Stubby Eight drivers cover the sizes and formats you're most likely to need without duplicating what's already in a general toolbox. Slotted: 5.5x75mm, 6x150mm, 8x150mm, plus a 6x25mm stubby Phillips: #1x75mm, #2x150mm, #3x150mm, plus a #2x25mm stubby Stubby drivers reach fasteners full-length drivers can't A Tip Designed to Grip, Not Slip The JAWSFIT tip profile is machined to seat deeper into the screw's cross recess than a standard tip, keeping the driver from riding up and rounding out the head. Reduces cam-out on worn, painted, or over-torqued screws Black-point finish on the tip for added wear resistance Works across both the standard and stubby drivers in this set What's in the Box No. 900 Slotted Screwdriver, 5.5 x 75mm / 3-in. — 1 No. 900 Slotted Screwdriver, 6 x 150mm / 6-in. — 1 No. 900 Slotted Screwdriver, 8 x 150mm / 6-in. — 1 No. 900 Phillips Screwdriver, #1 x 75mm / 3-in. — 1 No. 900 Phillips Screwdriver, #2 x 150mm / 6-in. — 1 No. 900 Phillips Screwdriver, #3 x 150mm / 6-in. — 1 No. 920 Stubby Slotted Screwdriver, 6 x 25mm / 1-in. — 1 No. 920 Stubby Phillips Screwdriver, #2 x 25mm / 1-in. — 1 Key Specifications Set Size 8 pieces Tip Types Slotted and Phillips, JAWSFIT profile Slotted Sizes 5.5mm, 6mm, 8mm (plus 6mm stubby) Phillips Sizes #1, #2, #3 (plus #2 stubby) Shank Material Chrome vanadium steel Grip Design Cushioned hexagonal cross-section handle with knurled shank Made In Japan Built For General MaintenanceElectrical WorkAppliance RepairAutomotive RepairTight-Clearance AccessCabinetry & Furniture Pro Tip Grab a No. 920 stubby first when working behind a dash panel, inside a cabinet, or in an electrical box — the full-length drivers in this set won't clear tight spaces, and the stubbies use the same JAWSFIT tips. Warranty & Support Covered by Vessel Tools USA's 3-year limited warranty against manufacturing defects, standard on all Vessel-brand screwdrivers. Does not cover damage from misuse, abuse, alteration, or normal wear. Tool Nut's Take Tool Nut's Take One Case, Both Drive Types, Two Reach Lengths The Vessel 9008EVA Megadora JAWSFIT 8-Piece Set covers slotted and Phillips in both full-length and stubby formats, with a tip designed specifically to resist cam-out. Who it's for: Techs and DIYers who want both drive types covered without buying two separate sets, and who occasionally need a stubby for tight clearance. Why it stands out: The JAWSFIT tip and chrome vanadium shank are built for repeated torque, not just light-duty driving. Worth knowing: This set doesn't include an Impacta hammer-strike driver — pair it with a Vessel Impacta set if stuck or rusted screws are a regular problem. Common Questions What does JAWSFIT mean? It's Vessel's tip design, machined with a black-point profile intended to bite into the screw head and resist cam-out compared with a standard stamped tip. Are the stubby drivers the same tip quality as the full-length ones? Yes, both No. 920 stubby drivers use the same JAWSFIT tip geometry as the six full-length No. 900 drivers. What's the shank made of? Chrome vanadium steel, heat-treated. Where is this set made? Japan.