Alvera AirLink Mini Connector for AirMini Travel CPAP Machines Twin Pack
Alvera AirLink Mini Connector for AirMini Travel CPAP Machines, Twin Pack The Alvera AirLink Mini Connector is a compatible connector for AirMini travel machines, supplied as a twin pack. AirMini does not use standard CPAP tubing or standard mask fittings. It runs a narrow proprietary hose and a connection system of its own, which is what allows a machine that size to work at all, and it is also why an AirMini setup cannot be repaired with generic parts from a drawer. The connector is the small component that makes the circuit work, and when it splits, distorts or loses its grip the whole machine sits unused until it is renewed. Keeping a compatible connector on hand is the cheapest insurance a travel machine owner can buy. Two units means one stays permanently in the travel bag while the other is in use, so the spare is already packed rather than sitting in a drawer at home. What is included Item Detail Condition AirLink Mini Connector Two compatible connectors for AirMini devices, REF 53102 NEW What is not included Item Detail Status AirMini machine Travel therapy machine SOLD SEPARATELY AirMini tubing Proprietary air tubing for the device SOLD SEPARATELY Mask and headgear Any interface, with its own AirMini setup requirements SOLD SEPARATELY Humidification cartridges Waterless humidification consumables where used SOLD SEPARATELY Mask adapter Adapter where the mask in use requires one SOLD SEPARATELY Machine filters Air inlet filters for the device SOLD SEPARATELY Check fit and vent before use Confirm the connector seats fully and holds firmly at both ends before the first night. A partial connection leaks pressure and the therapy is not delivered as set. Where the setup relies on vent holes to clear exhaled air, those holes must never be blocked, taped or covered, and nothing should be inserted into them. A blocked vent allows exhaled carbon dioxide to be rebreathed. Do not use a connector that is split, cracked, distorted or no longer grips, and do not attempt to repair one with tape or adhesive. Do not modify the connector or use it to join components it is not intended to join. Follow the setup instructions supplied with the machine and the mask. Why the AirMini circuit is different A bedside machine moves a large volume of air down a wide hose and lets the mask vent do the work. AirMini takes a different approach because it has to fit in a hand: a narrow tube, higher velocity, and a connection system engineered around that specific arrangement. Every part of the circuit is matched to the rest. The practical consequence is that generic accessories do not substitute. A standard 22 mm elbow, a spare hose from an old bedside machine, or a connector from a different platform will not deliver correct therapy even where it can be forced together. Anyone running an AirMini as their travel machine needs the right small parts, and needs them before the trip rather than during it. Key features Made for AirMini devices, matching the proprietary connection rather than adapting a bedside part to fit. Keeps a travel machine usable, since a failed connector takes the whole setup out of service until it is renewed. Small and light, so a spare adds nothing meaningful to a travel bag or a hand luggage allowance. Straightforward fitting, pushing on and locating positively with no tools and no adjustment. Two units in one pack, so one lives permanently in the travel bag and the other stays in use at home, with no packing to remember before a trip. Alvera own brand from Elarix Medical, supplied direct and individually referenced as REF 53102 for straightforward reordering. Also available as a single pack, REF 53101, for a straight one for one renewal. Check the setup before ordering AirMini setups vary by mask. Different mask families need different setup packs, adapters and humidification arrangements, and the parts are not interchangeable between them. This connector is for AirMini devices and does not fit Air 10 or AirSense 11 machines, which use standard tubing connections. Where the setup in use is not certain, ask before ordering with the machine and mask model to hand. Specification Brand Alvera Product AirLink Mini Connector Reference 53102 GTIN 5065027735491 Pack size 2 Product type Compatible connector, third party accessory Fits AirMini devices Does not fit Air 10 series and AirSense 11 machines Supplied Non-sterile, single patient use Condition New Care and renewal Action Detail Interval Wipe Wipe with a mask wipe or a damp cloth Daily Wash Wash in warm water with a mild detergent, rinse thoroughly and air dry away from direct sunlight Weekly Inspect Check for splits, distortion, clouding and a secure grip at both ends Weekly Vent check Where the setup vents through this component, confirm the holes are clear and never insert anything into them Weekly Renew Fit a fresh connector when the grip slackens or the plastic clouds, splits or distorts Typically every three to six months The above is general guidance for a single user. The instructions supplied with the machine and the mask take precedence. Do not use a dishwasher, bleach, alcohol-based cleaners or scented oils on any part of the circuit. Alvera range Alvera is the own-brand accessory range from Elarix Medical, covering the consumables that sleep therapy depends on and that need renewing on a schedule. AirLink covers connectors and adapters, alongside PureFlow filters, ThermaAir heated tubing, AirFlex tubing, AquaPure water chambers, AirSoft cushions and PureWipe cleaning wipes. Products are individually referenced and barcoded, so a repeat order is placed against a code rather than a description.