Whisper Wash Freedom 19" Surface Cleaner

The Whisper Wash Freedom 19" Surface Cleaner is a low-GPM rotary surface cleaner built for operators running smaller rigs. Its 46 Series swivel keeps the spray bar spinning smooth where a heavier cleaner would bog down or under-rotate. Nineteen-inch cleaning path, XENOY composite cover, made in the USA. Key Features 46 Series high-efficiency swivel: Purpose-built for low flow, so it spins smooth on smaller machines instead of stalling. Quick-change cartridge swaps in the field with no press. XENOY composite cover: SABIC PC/PBT alloy that takes a hit on the job site and keeps the spray contained under the hood. Flip-n-Fold aluminum handle: Folds down for transport and storage. The whole unit runs 17 lbs, so it's easy to carry between jobs. Legacy 2-tip spray bar: Balanced and machined. Two I-MEG tips lay down overlapping jets that clean the full 19" path in one pass. No zebra striping. Hot or cold water: Runs up to 185°F. No change to your setup either way. Made in the USA: 6-month warranty against defects in materials and workmanship. Specifications Cover material Blue XENOY composite (PC/PBT alloy) Handle Powder-coated aluminum, Flip-n-Fold Cleaning width 19" Flow rate 3.5–6.0 GPM Max pressure 1,500–4,000 PSI Water temperature Hot or cold, up to 185°F Swivel 46 Series high-efficiency, quick-change cartridge Spray bar Legacy 2-tip, 1/4" I-MEG tips Weight 17 lbs Country of origin USA Warranty 6 months What's Included Complete unit: XENOY cover, aluminum Flip-n-Fold handle, 46 Series swivel, Legacy 2-tip spray bar, nylon brush skirt, quick connect inlet Tips sized to your machine. Confirm your GPM and PSI before you order so the orifice matches your rig. Built for lower-GPM rigs in the 3.5–6.0 GPM, 1,500–4,000 PSI window. If you're running 8 GPM or more, this one will under-cover for the flow you've got. Look at the Big Guy 28" or Maxima 36" instead. How It Works Water comes in through the quick connect to the 46 Series swivel, which spins the Legacy spray bar under the XENOY cover. Two I-MEG tips throw overlapping high-pressure jets that clean the whole 19" path in one pass, so you skip the striping you get dragging a single wand. The nylon brush skirt rides the surface, holds the bar at the right height, and keeps overspray down. One note for soft wash crews: this is a high-pressure water tool, not an SH applicator. If bleach overspray lands on the cover or handle, rinse it off when you're done. SH corrodes aluminum and crazes polycarbonate over time. Pairs Well With ST1500 Pressure Washer Gun Rampage Beast Pressure Washer Hose Brass Quick Connect Socket Frequently Asked Questions What size machine do I need for the Whisper Wash Freedom 19? It's built for lower-GPM rigs. The supplier rates it 3.5 to 6.0 GPM and 1,500 to 4,000 PSI. Tips get matched to your machine, so confirm your GPM and PSI before you order. Running more than 6 GPM, step up to a bigger cleaner. Can you run hot water through it? Yes. Hot or cold, up to 185°F. No change to your setup either way. Is the 46 Series swivel rebuildable? Yes. It uses a quick-change cartridge, so you swap it in the field. No press, no bearing job. That cuts the downtime older swivels cost you when they seize.