10,000L Diesel Storage Tank

Ten thousand litres of buying power. At 10,000 litres you're not just storing fuel, you're buying it on your terms — a full tanker load at the price you negotiated, held on site and ready when the machines are. The RapidPlas 10,000L Diesel Storage Tank is a one-piece rotationally moulded above-ground tank in diesel-grade, UV-stabilised polyethylene, built for the properties, civil contractors and transport yards that burn through a 5,000L faster than they'd like. Poly earns its place at this size. There's nothing inside to rust, so nothing breaking loose and travelling into fuel systems where injector clearances are measured in microns. There are no welds or seams, because it's moulded in one piece. And it's substantially lighter than an equivalent steel tank. which shows up in your freight bill and in how easily you can place it. Fitted out ready to work: 50mm anti-splash, anti-static fill line with non-return valve, 50mm low-level outlet with a lockable ball valve and camlock, level gauge, water separator filter, suction fittings, and an earth strap and rod. Made in Australia. Moulded at our Tamworth facility, backed by a 5 year warranty, and built to AS/NZS 4766. Key features One-piece rotationally moulded construction — no welds or seams to fail Diesel-grade, UV-stabilised polyethylene Won't rust or corrode internally — no tank-borne contamination reaching your injectors 50mm anti-splash, anti-static fill line with non-return valve 50mm low-level outlet with lockable ball valve tap and camlock Level gauge readable from the ground Water separator filter and suction fittings included Earth strap and rod for static discharge Vent with 300mm riser Significantly lighter than steel — lower freight, simpler placement Australian made and Australian owned