Arwibon GT08 Street Tire

Replacement street tire for the Arwibon GT08 electric scooter. This tire uses a road-oriented tread pattern for riding mainly on asphalt, concrete, and other paved surfaces. It can be used to replace a worn or damaged original GT08 tire when the tire and rim specifications match. Product Features Designed for compatible Arwibon GT08 scooters Street tread pattern Suitable for paved roads and daily riding Replacement for worn or damaged tires Can be used on the front or rear wheel when the size matches Sold as 1 tire Compatibility Notice Please compare the tire size marking, width, inner diameter, tread type, and rim specification with your original tire before ordering. Different GT08 production versions may use different tire sizes or wheel configurations. Do not order only according to the scooter model name. Tools Required Tire levers Allen key set Socket or wrench set Air pump Valve tool if required Clean cloth Tire Removal 1. Remove the Wheel Turn the scooter off and place it securely on a repair stand. Remove the wheel axle hardware with the correct tools. If removing a motor wheel, disconnect the motor cable carefully before taking the wheel away from the scooter. Keep the washers and spacers in their original order. 2. Deflate the Tire Remove the valve cap and release all air pressure. The tire should be completely deflated before removal. 3. Remove the Old Tire Push the tire bead toward the center of the rim. Use tire levers to lift one side of the tire over the rim edge. Work around the wheel gradually until the tire can be removed. If the wheel uses an inner tube, avoid pinching or cutting it during removal. Tire Installation 1. Compare the New Tire Before installation, check: Tire size Tire width Sidewall markings Tread direction Rim fit Do not install the tire if the specification is different from the original. 2. Mount the Tire Fit one side of the tire bead onto the rim. Install the inner tube if required. Place the second bead onto the rim slowly and check that the tube is not trapped between the bead and rim. 3. Inflate the Tire Check that the bead sits evenly around the rim. Inflate the tire gradually to the pressure specified for the scooter or tire. Stop if the bead rises unevenly. Final Check After reinstalling the wheel, confirm that: The tire is seated evenly Tire pressure is correct The wheel rotates freely Axle hardware is secure Brake operation is normal The tire does not rub against the frame or suspension Check the tire pressure again after the first short ride.