OP-SBSW 7 Day Socket Box Timer — 16 Amp Volt-Free

Weekly scheduling for heating, hot water and lighting The Optimum OP-SBSW is a captive-tappet 7-day timeswitch, for schedules that differ across the week. If you want the heating on later at weekends, or a shop sign running to different hours on Sundays, a 7-day dial does what a 24-hour timer can't. It mounts directly over a single pattress box, so it fits a standard back box on the surface or in the wall. The dial drives volt-free changeover contacts, meaning it can switch a separate circuit rather than carrying the load itself. Key features 7 day dial with captive tappets 2 hour tappet intervals across the week Volt-free SPDT changeover contacts Designed to mount directly over a single pattress Timed / OFF / constant selection General purpose — heating, hot water, lighting and appliance circuits Technical specification Switching capacity: 16 A resistive, 8 A inductive Contacts: volt-free SPDT changeover Programme: 7 day, 2 hour tappet intervals Mounting: standard single pattress (socket box), surface or flush Installation notes Not suitable for discharge lighting without a contactor. Installation should be carried out by a qualified electrician in accordance with I.S. 10101. Need 15 minute resolution rather than 2 hour? See the 24-hour version, the OP-SBST. Frequently Asked Questions Q: Where can I buy a 7 day socket box timer in Ireland? A: The Optimum OP-SBSW 7 day socket box timer is available from Shamrock Electrical at shamrockelectrical.ie, with free delivery across Ireland from our base in Rathcoole, Co. Dublin. Q: How much does the OP-SBSW cost? A: It costs €61.35 including VAT, with free delivery across Ireland. Q: Why choose 7 day over a 24 hour timer? A: A 7 day dial lets each day of the week run its own schedule — heating later on Saturdays, off entirely on Sundays, and so on. A 24 hour timer repeats the same programme every day. Q: What are the tappet intervals? A: 2 hours on the 7 day dial. If you need finer control, the 24 hour OP-SBST gives 15 minute intervals but the same schedule every day. Q: Do I need an electrician to install it? A: Yes. It wires into a fixed circuit and mounts over a standard pattress box, so it should be installed by a registered electrician in accordance with I.S. 10101. Q: Can I use it for fluorescent or discharge lighting? A: Not directly. Discharge lighting must be switched through a suitably rated contactor. Your electrician will size this for the load. Q: Do you deliver across Ireland? A: Yes. We deliver to every county in the Republic of Ireland, and you can also collect from our Rathcoole store. Supplied by Shamrock Electrical Supplies, Rathcoole, Dublin. Trade enquiries welcome — sales@shamrockelectrical.ie or (01) 401 9907.