Carbon Collective Purify Water Spot & Stain Remover 500ml

Carbon Collective · Purify · Water Spot & Stain Remover Water Spots. Mineral Deposits. Rust Stains. Gone. Advanced Gel Formula. pH 2.7. No-Scrub Solution. One product that does what standard water spot removers don't attempt. Purify is a highly effective water spot and stain remover built on an advanced gel formula that dissolves water spots, mineral deposits, limescale, and rust stains — quickly and without scrubbing. Where standard water spot removers stop at surface marks, Purify's acid blend and surfactant combination goes further. Unlike single-purpose spot removers, Purify eliminates limescale, rust staining, and organic buildup from both painted and bare-metal surfaces. Badges, panel gaps, glass, ceramic coated finishes — the formula handles all of it. Whether you're restoring clarity to a water-marked windscreen or clearing grime that's collected around trim lines, Purify delivers a clean result without added effort. pH Level 2.7 Acid blend · targeted formula Gel Formula Clings to surface · extended dwell Application No-Scrub Wipe or dwell · spray and rinse "In testing since Purify landed in the US. This is a serious product. The gel consistency lends itself to real dwell time — it stays where you put it. Against other ready-to-use options, I'm seeing better mineral removal, it wipes out more issues than the competition, and the pH is a reminder to rinse or hit it with a rinseless wash afterward to neutralize it properly. Testing continues — but I'm already reaching for this over similar options because the results are more worthwhile. Purify Water Spot Remover earns its place on the shelf... already!" — Detail Division What Purify removes Water Spots & Mineral Deposits The gel formula clings to the surface and dissolves the mineral bonds that cause water spots — removing them without abrasion and without damaging the finish underneath. Limescale & Road Salt Targeted acid chemistry breaks down limescale and road salt accumulation that conventional cleaners and water alone cannot remove — including the stubborn deposits that collect in panel gaps and around badges. Rust Stains Safe on painted and bare-metal surfaces — Purify removes rust staining without attacking the surrounding finish. Polished and bare-metal surfaces maintained without compromise. Organic Buildup & Coating Clog Removes built-up organic matter and unclogs ceramic coatings and protection layers that have become contaminated — restoring the hydrophobic performance of the coating rather than compromising it. Safe on Ceramic Coated Finishes Formulated to work on coated surfaces without stripping or degrading the protection layer — Purify cleans the coating rather than removing it. Directions Wash the vehicle before use. Shake well and apply 2–3 sprays onto a soft microfibre cloth. Gently wipe the surface until stains are removed — reapply if necessary. For heavy water spots or stains, apply Purify directly to the surface and allow to dwell for 30 seconds before wiping. Finish by rinsing the surface or wiping with a damp cloth. Safe On Paint Glass Metal Bare Metal Ceramic Coated Polished Metal Standard water spot removers solve one problem. Purify solves the whole category — water spots, mineral deposits, limescale, rust, organic buildup, and coating clog — in a single formula that requires no scrubbing. Key Notes Wash vehicle before application Apply to cloth · or direct for heavy spots 30 sec dwell for heavy staining Rinse or wipe with damp cloth to finish Do not use in direct sunlight Do not use on hot surfaces Purify is an acidic formula at pH 2.7. Do not apply in direct sunlight or to hot surfaces — this causes the product to dry before it can be wiped, leading to potential surface issues. Always wash the vehicle before use. After use, rinse thoroughly or follow with a rinseless wash to neutralize the acid and prevent unintended issues on surrounding surfaces. Do not allow extended dwell beyond recommended time on sensitive finishes.