Oxva Xlim SS Top-Fill Pods

Oxva Xlim SS Top-Fill Replacement Pods Oxva Xlim SS Top-Fill Pods feature stainless steel mesh coils with Evolv DNA chipset temperature control for anti-dry hit protection and consistent flavour from full to empty. Available in 0.4Ω, 0.6Ω, 0.8Ω, and 1.2Ω resistances for RDL and MTL vaping. Sold in packs of 3 at Vape Connect. Oxva Xlim SS Replacement Pods use precision temperature regulation that senses coil heat and adjusts power output automatically, eliminating dry hits and flavour fade. The stainless steel mesh construction extends coil life by up to 30% compared to standard pods. The 2ml top-fill design allows quick, mess-free refilling without removing the pod from the device. Oxva Xlim SS Refill Pods are compatible with all Xlim series kits including Xlim, Xlim Pro 2 DNA, and Xlim V3. The advanced temperature control feature only activates when paired with the Xlim Pro 2 DNA kit. The ergonomic mouthpiece design delivers a comfortable draw across both RDL and MTL vaping styles. Oxva Xlim SS Top-Fill Pods support nic salt and 50/50 freebase e-liquids across the full resistance range. Lower resistances (0.4Ω to 0.6Ω) suit warmer RDL draws with bigger clouds, and higher resistances (0.8Ω to 1.2Ω) suit tighter MTL draws that replicate the sensation of smoking a traditional cigarette. Oxva Xlim SS Top-Fill Pods Features Oxva Xlim SS Replacement Pods combine stainless steel mesh coils with Evolv DNA temperature control and top-fill refilling in a leak-resistant, 2ml pod cartridge for RDL and MTL vaping. Below are the 10 key features of Oxva Xlim SS Top-Fill Pods: Stainless steel mesh coils deliver even heat distribution for consistent flavour and dense vapour on every draw. Evolv DNA chipset temperature control regulates coil heat automatically, eliminating dry hits and flavour fade. 4 resistance options, 0.4Ω, 0.6Ω, 0.8Ω, and 1.2Ω covering RDL and MTL vaping styles. 2ml refillable pod capacity with a transparent body for easy e-liquid level monitoring. Top-fill design allows quick, mess-free refilling without removing the pod from the device. 30% longer coil life compared to standard pods, reducing replacement frequency and long-term costs. Anti-dry hit protection senses low e-liquid levels and adjusts power output to prevent burnt taste. Leak-resistant construction with a sealed top design that prevents e-liquid from escaping during use and refilling. Compatible with all Xlim series kits, temperature control activates exclusively with the Xlim Pro 2 DNA. Sold in packs of 3 providing three pod cartridges per box for extended use between purchases. Why Choose Oxva Xlim SS Top-Fill Pods Oxva Xlim SS Top-Fill Pods stand out for 3 reasons, stainless steel mesh coils with DNA temperature control, anti-dry hit protection that maintains flavour consistency, and a 30% longer coil lifespan that reduces replacement costs. Stainless Steel Mesh with DNA Temperature Control Oxva Xlim SS Pods use stainless steel mesh coils paired with the Evolv DNA chipset for automatic temperature regulation. The chipset monitors coil heat in real time and adjusts power output to maintain optimal vaporisation temperature on every draw. Standard pods without temperature control rely on fixed wattage, creating inconsistent heat that degrades flavour over time. Oxva Xlim SS Top-Fill Pods deliver precision-controlled heating that keeps flavour accurate and vapour density stable from the first puff to the last. Anti-Dry Hit Protection Oxva Xlim SS Replacement Pods detect when e-liquid levels run low and automatically reduce power output to prevent the coil from burning dry cotton. Standard pods continue firing at full wattage regardless of e-liquid level, producing harsh, burnt hits when the tank runs low. The DNA chipset eliminates flavour fade by maintaining consistent coil temperature across the entire pod lifespan. Oxva Xlim SS Top-Fill Pods deliver smooth, fresh-tasting vapour from full to empty without the sudden drop in flavour quality common in standard pod systems. 30% Longer Coil Life Oxva Xlim SS Pods extend coil lifespan by up to 30% compared to standard replacement pods. The stainless steel mesh construction distributes heat more evenly than standard metal alloys, reducing hotspot damage and slowing coil degradation over time. The temperature-controlled heating prevents the coil from exceeding optimal operating temperatures, further extending usable life. Oxva Xlim SS Top-Fill Pods reduce pod replacement frequency, lowering long-term vaping costs and minimising waste. How to Use Oxva Xlim SS Top-Fill Refill Pods Fill the pod through the top-fill port, insert it into your Xlim device, and inhale to vape. The entire process takes under 2 minutes with zero coil changes or manual settings. Step 1: Remove the Pod from Packaging Take one Oxva Xlim SS Top-Fill Pod from the 3-pack. Remove any protective seals covering the pod contacts and mouthpiece. Step 2: Fill the Pod Pop the top-fill cap and squeeze e-liquid into the fill port. Avoid overfilling past the maximum line to prevent leaking and flooding. Replace the cap firmly after filling. Step 3: Wait for Coil Saturation Allow 3 to 5 minutes for the stainless steel mesh coil to fully absorb the e-liquid. Skipping the wait period increases the risk of a dry hit on the first draw and reduces coil lifespan. Step 4: Insert into the Device Slide the pod into your Xlim kit until it clicks into place. The device detects the pod automatically with no buttons or settings required. Temperature control activates automatically when paired with the Xlim Pro 2 DNA. Step 5: Inhale to Vape Draw from the mouthpiece to activate the device. Oxva Xlim SS Top-Fill Pods use draw activation, no fire button required. The Evolv DNA chipset regulates coil temperature in real time for consistent flavour on every draw. Step 6: Refill or Replace When Needed Top up the pod through the top-fill port when e-liquid runs low. Replace the entire pod cartridge when flavour quality degrades or vapour production weakens — the built-in coil eliminates separate coil changes. What's in the Box? Every Oxva Xlim SS Top-Fill Pods pack contains everything needed to start vaping immediately with zero additional purchases. 3 x Oxva Xlim SS Top-Fill Refillable Pods (2ml each) FAQs About Oxva Xlim SS Top-Fill Replacement Pods What resistances are available in Oxva Xlim SS Top-Fill Pods? Oxva Xlim SS Top-Fill Pods are available in 0.4Ω, 0.6Ω, 0.8Ω, and 1.2Ω resistances. The 0.4Ω and 0.6Ω options suit RDL vaping, and the 0.8Ω and 1.2Ω options suit MTL vaping. What devices are compatible with Oxva Xlim SS Top-Fill Pods? Oxva Xlim SS Top-Fill Pods are compatible with all Xlim series kits including Xlim, Xlim Pro 2 DNA, and Xlim V3. The advanced temperature control feature only activates when paired with the Xlim Pro 2 DNA kit. What is Evolv DNA temperature control in Oxva Xlim SS Pods? The Evolv DNA chipset monitors coil heat in real time and automatically adjusts power output to maintain optimal vaporisation temperature. The feature eliminates dry hits and flavour fade, and only activates when paired with the Xlim Pro 2 DNA kit. How long do Oxva Xlim SS Top-Fill Pods last? Oxva Xlim SS Top-Fill Pods last up to 30% longer than standard replacement pods. The stainless steel mesh construction and DNA temperature control reduce coil degradation, extending usable lifespan significantly. Do Oxva Xlim SS Top-Fill Pods leak? No, Oxva Xlim SS Top-Fill Pods use a sealed top-fill design with leak-resistant construction that prevents e-liquid from escaping during use and refilling. What e-liquids work best with Oxva Xlim SS Top-Fill Pods? The 0.4Ω and 0.6Ω pods perform best with 50/50 freebase and nic salt e-liquids for RDL vaping. The 0.8Ω and 1.2Ω pods perform best with nic salt e-liquids in 10mg to 20mg strength for MTL vaping. What capacity are Oxva Xlim SS Top-Fill Pods? Oxva Xlim SS Top-Fill Pods hold 2ml of e-liquid per pod cartridge. The transparent body allows easy monitoring of e-liquid levels during use. How many pods come in a pack of Oxva Xlim SS Top-Fill Pods? Oxva Xlim SS Top-Fill Pods are sold in packs of 3, with each pod holding 2ml of e-liquid. Each pack provides a combined e-liquid capacity of 6ml across all three pods.