EKG

The EKG (Elektro Kardio Gramm) is a versatile 8-step analogue sequencer designed to fit the euro rack convention. Each step has a unique Function Control and can be turned off, skipped, repeated or set as a reset point. Modes: Off (rest), x1, x2, x3, x4, Skip, Reverse and Rest. Width: 38HPDepth: 25mm Weight: 0.285kg Voltage: -/+12V Power Consumption: +12V, 15mA / -12V, 28mA Doepfer style power cable included. Screws not included. EKG ships in the design scheme as shown. CLOCK IN: This is the clock input. Use a 5V clock signal, or a signal from an LFO TEMPO 1/2 IN: When this socket sees 5V, the sequencer will run at half speed. RESET IN: When this socket sees a 5V signal, the sequencer will reset to Step 1. CV OUT & RANGE: Connect the CV out to your modular synth’s VCO to control Pitch, or to Cut-Off on your Filter GATE OUT: Connect this to the EG Trigger input on your synth. Output is 5V. Operational Modes Mode 1: This is essentially a Rest. No Gate sent out. OFF. Mode 2: The step is played once, with one Gate being x1 sent out. Mode 3: The step is played twice, with two Gates being x2 sent out. Mode 4: The step is played thrice, with three Gates being x3 sent out. Mode 5: The step is played four times, with four Gates x4 being sent out. Mode 6: The step is entirely missed and the sequencer SKIP instead jumps to the next step. Mode 7: The sequencer plays backwards all the REV(erse) way to step one. Mode 8: Sequencer resets to step One. This step is RESET not ‘played’. Use this to change sequence length.