Active Aqua 1/3 HP Boost Outdoor Chiller

Active Aqua 1/3 HP Boost Outdoor Chiller Bags of ice are an unreliable, expensive, and logistically exhausting way to maintain cold plunge temperatures — particularly in warm climates or during summer months when ambient heat works against every degree you're trying to hold. The Active Aqua Outdoor Chiller 1/3 HP Boost is engineered to maintain water temperatures as low as 39°F (3°C) continuously, without ice, in cold plunge tubs, ice baths, hydroponic reservoirs, and aquaculture systems. A high-efficiency compressor paired with a durable 304 stainless steel heat exchanger delivers powerful cooling while running at reduced noise levels — a meaningful advantage when the unit is positioned near a recovery or wellness space. The Active Aqua Outdoor Chiller integrates everything needed for clean, stable cold water into a single unit: an 800 GPH circulation pump, a built-in ozone generation system for water quality, and a premium 20-micron filtration system. A microcomputer control system with digital temperature display lets you dial in and hold your target temperature precisely, so every session starts from the same baseline. The corrosion-resistant ABS housing and rainproof construction are rated for outdoor installation, and locking caster wheels make repositioning straightforward without requiring tools. The 120V GFCI-protected power cord and ETL registration confirm compliance with outdoor electrical safety standards. Whether the application is athletic recovery, general wellness, hydroponics, or aquaculture, the Active Aqua Outdoor Chiller 1/3 HP Boost delivers consistent, low-maintenance temperature control with a compact 14" × 17.2" × 18.5" footprint. Note that initial chilling times will vary based on starting water temperature and ambient conditions — refer to the performance chart in the Product Information tab for capacity guidance across operating ranges. Features 🧊 Cools to 39°F (3°C) Maintains consistently low temperatures for cold plunge, ice bath, and reservoir cooling without the need for ice. 🌀 Integrated 800 GPH Pump Built-in circulation pump keeps water moving through the cooling and filtration system continuously for uniform temperature distribution. 🔬 Ozone Generation & 20-Micron Filtration Combined ozone and filtration system maintains clean, clear water while reducing the frequency of manual maintenance. 🌧️ Rainproof Outdoor-Rated Design Corrosion-resistant ABS housing and rainproof construction are approved for outdoor installation in exposed environments. 🎛️ Microcomputer Temperature Control Digital controller allows precise temperature selection and monitoring, ensuring consistent cold therapy performance across sessions. 🔩 304 Stainless Steel Heat Exchanger Durable stainless steel construction resists corrosion for long-term reliability in wet and high-humidity outdoor environments. Specifications Specification Value Horsepower 1/3 HP Minimum Temperature 39°F (3°C) Voltage 120V Amperage 5.0A Refrigerant R-513A Circulation Pump 800 GPH Filtration 20-micron Heat Exchanger 304 Stainless Steel Included Fittings 1/2", 3/4", and 1" Power Cord 120V GFCI-protected Unit Dimensions 14" L × 17.2" W × 18.5" H (355 × 435 × 470 mm) Weight 36 lbs Outdoor Rated Yes — Rainproof ETL Listed Yes CE Registered Yes Support & Manuals 📄 Active Aqua Outdoor Chiller Instructions Warranty The Active Aqua Outdoor Chiller 1/3 HP Boost is backed by a 1-year manufacturer's warranty. Please retain your proof of purchase and refer to the included documentation for full warranty terms and claim procedures. Frequently Asked Questions How cold can the Active Aqua Outdoor Chiller get the water? + The Active Aqua Outdoor Chiller 1/3 HP Boost can maintain water temperatures as low as 39°F (3°C). This is well within the range used for cold plunge therapy and athletic recovery protocols. Keep in mind that the time required to reach target temperature will depend on the starting water temperature and ambient conditions. Can this chiller be used outdoors year-round? + The Active Aqua Outdoor Chiller is approved for outdoor use and features a rainproof design suitable for exposed installations. However, during freezing weather conditions the unit must be drained and disconnected to prevent damage. It is not designed to operate in sub-freezing ambient temperatures. Does this chiller require a separate pump or filtration system? + No — the Active Aqua Outdoor Chiller has an integrated 800 GPH circulation pump, a 20-micron filtration system, and a built-in ozone generator included in the unit. There is no need to purchase separate circulation or filtration components for standard cold plunge or recovery bath applications. What fitting sizes are compatible with this chiller? + The Active Aqua Outdoor Chiller ships with 1/2", 3/4", and 1" fittings included, covering the most common inlet and outlet sizes used in cold plunge tubs, hydroponic reservoirs, and aquaculture systems. Note that this unit is not rated for connection to central or household plumbing systems. Can I use this chiller for hydroponics or aquaculture? + Yes — while the Active Aqua Outdoor Chiller 1/3 HP Boost is designed with cold plunge and ice bath recovery as primary applications, it is also suitable for hydroponic reservoirs and aquaculture systems requiring precise water temperature control. Its corrosion-resistant housing and integrated filtration make it a practical option for both wellness and cultivation use cases. How long does it take to chill the water initially? + Initial chilling time varies based on the starting temperature of the water and the ambient environmental conditions at your installation location. For specific cooling performance data across different starting temperatures and volumes, refer to the performance chart available in the Product Information tab. What refrigerant does the Active Aqua Outdoor Chiller use? + The Active Aqua Outdoor Chiller 1/3 HP Boost uses R-513A refrigerant. R-513A is a lower global warming potential (GWP) alternative to older refrigerant types, reflecting a design approach oriented toward reduced environmental impact.