Scuba Cylinder Hydro Test Machine for Dive Cylinder Test

Scuba cylinder hydro test machine can help you perform scuba tank hydrostatic test to determine whether it is qualified. Scuba cylinder, as known as scuba tank or dive tank, requires periodic inspection to ensure its safe daily use. The scuba cylinder test machine uses the advanced water jacket method to perform scuba cylinder expansion deformation test. It will automatically detect your scuba cylinder deformation rate, thus determining whether the scuba tank is qualified and can continue to serve. The water jacket method hydrostatic test machine is also applicable to diverse seamless cylinders smaller than 15 Liters, such as SCBA tanks, aviation oxygen tanks and portable Co2 extinguishers. Scuba Cylinder Hydro Test Machine Benefits Water jacket method scuba tank hydrostatic test system Comes with stainless-steel water jacket Non-destructive hydro test without damaging your dive cylinder Automated by computer ensures easy operation and test accuracy Automatically issue test results and generate a test report Scuba Cylinder Hydro Test Procedures Scuba hydro test system contains a power console and a water jacket. First, fill water in your scuba cylinder and place it in the water jacket. Then use the hydro test machine to pressurize scuba cylinder in two stages. Firstly pressurize scuba cylinder to its working pressure, then pressurize it to 1.5 times its working pressure, and maintain the pressure. During pressure holding period, scuba cylinder will expand due to internal high pressure, so some water in the water jacket will flow to a measuring cup. After pressure relief, the scuba cylinder will partially return to its original state, so some water in the measuring cup will flow back to the water jacket. The amount of water remaining in the measuring cup represents deformation amount of the scuba cylinder. The machine will automatically calculate scuba cylinder’s deformation. If the deformation rate exceeds 5%, machine will determine the scuba cylinder unqualified. For dive cylinder test Wide test pressure Pressure adjustable Automation Scuba Cylinder Dryer After cleaning or testing scuba cylinder, the unique structure of the scuba cylinder, with its small opening and large body, makes it difficult to quickly dry the moisture inside. This scuba cylinder dryer can help you quickly dry scuba cylinder interior. It uses electric heating, and the temperature can be set and adjusted. The built-in fan will continuously deliver hot air into scuba cylinder, thereby drying the moisture on the inner wall of the scuba cylinder. This machine is equipped with six stations and can dry six scuba cylinders at the same time. And it is also applicable to various cylinders smaller than 15 liters. Frequently Asked Questions What is scuba cylinder hydrostatic test interval? It depends on the regulations in your country. Typically, Scuba dive cylinder hydrostatic test interval is 3 years, or the cumulative filling times reaches 2000, whichever comes first. Will the hydro test machine damage my scuba cylinder? The water jacket method scuba dive cylinder hydrostatic test is a non-destructive test, so it won’t damage your scuba cylinder. How does the test machine determine whether a Scuba cylinder is qualified? Scuba dive cylinder hydro test machine will automatically determine whether a Scuba dive cylinder is qualified by detecting its deformation rate. Normally, if a Scuba cylinder deformation rate exceeds 5%, the machine will deem the scuba cylinder unqualified. Is scuba hydrostatic test for new or old cylinders? Scuba cylinder hydrostatic test is for old scuba dive cylinders that have been used for a period of time. Normally, there is no need to perform hydro test on new scuba cylinders. It depends on the regulations in your country. Typically, Scuba dive cylinder hydrostatic test interval is 3 years, or the cumulative filling times reaches 2000, whichever comes first. The water jacket method scuba dive cylinder hydrostatic test is a non-destructive test, so it won’t damage your scuba cylinder. Scuba dive cylinder hydro test machine will automatically determine whether a Scuba dive cylinder is qualified by detecting its deformation rate. Normally, if a Scuba cylinder deformation rate exceeds 5%, the machine will deem the scuba cylinder unqualified. Scuba cylinder hydrostatic test is for old scuba dive cylinders that have been used for a period of time. Normally, there is no need to perform hydro test on new scuba cylinders. Related Posts