Karcher Mississippi Water Recovery System

The Mississippi Recovery System collects and transfers wash water to a separate holding tank. Its compact footprint and integrated mounting provisions allow it to be incorporated into mobile and trailer-mounted wash-water recovery systems. Technical Specifications Specification Rating Manufacturer Part Number 1.103-516.0 Application Oil-free wash-water recovery and transfer Recovery / Transfer Rate Up to 30 GPM Recovery Tank Capacity 27 gal. Vacuum Motor 3-stage Airflow 100 CFM Sealed Lift 100 in. Electrical Supply 115/120V, 60 Hz Current Draw 15A Generator Compatibility Can be operated from a 3,500-watt generator Maximum Water Temperature 120°F Power Cord Length 15 ft. Shipping Weight 127 lb. Dimensions 24 × 27 × 59 in. Included Equipment Part Number Included Component 8.618-451.0 50 ft. of high-temperature 2 in. vacuum hose 8.928-850.0 Scupper head The vacuum inlet is configured for the included 2-inch recovery hose and scupper head. Vacuum and Recovery System 3-stage vacuum motor 100 CFM airflow 100 in. sealed lift Recovery and transfer capacity up to 30 GPM Rated for recovering water up to 120°F Compatible with recovery surface cleaners and hot-water pressure-washing equipment High-water shutdown protects the unit when the recovery tank reaches its operating limit 120V transfer pump moves recovered water to a separate holding tank Bulkhead fitting can be plumbed to an auxiliary tank for higher-volume recovery requirements Top-access filter basket captures solids before they enter the recovery system Tank and Construction 27-gallon high-density polyethylene recovery tank Thermal- and chemical-resistant tank construction Impact-resistant and UV-protected tank Integrated molded carrying handles Bolt-on mounting provisions built into the base for trailer installation Compact configuration for mobile recovery systems Optional caster-wheel kit available for movement around the jobsite System Requirements and Notes Recovered water is transferred to a separate holding tank. Holding tank is not included. Pressure washer is not included. Recovery surface cleaner is not included. Optional drain covers and water dikes can be used to contain runoff and prevent wash water from entering drains or leaving the work area. A compatible pressure washer, recovery surface cleaner and holding tank are required to configure a complete mobile recovery system.