WeAct Studio STM32C011F6P6 Development Board | ARM Cortex-M0+ | USB Type-C | 32KB Flash
Description Specifications Box Content Downloads More Info This WeAct Studio STM32C011 development board features the STM32C011F6P6 microcontroller based on the Arm® Cortex®-M0+ core running at up to 48MHz. The MCU integrates 32KB Flash memory and 6KB SRAM, making it an excellent choice for embedded applications, industrial control, sensor interfacing, and learning STM32 development. The board features a USB Type-C connector for power supply along with an onboard 3.3V LDO regulator, user LED, Reset button, and Boot button for convenient development and firmware programming. All GPIO pins are broken out to standard headers, allowing easy interfacing with external peripherals and breadboards. The development board is fully compatible with STM32CubeIDE, STM32CubeMX, Keil MDK, IAR Embedded Workbench, PlatformIO, Arduino (STM32duino), and other popular ARM development environments. Programs can be downloaded using any standard ST-Link V2/V3 programmer through the onboard SWD interface. The STM32C011F6P6 provides a rich set of peripherals including a 12-bit ADC, DMA controller, timers, RTC, watchdog timers, CRC calculation unit, USART, SPI and I²C interfaces. Low-power Run, Sleep, Stop and Standby modes make it suitable for battery-powered and energy-efficient applications. Note: This board features an original STM32C011F6P6 microcontroller and can be directly programmed using ST-Link from STM32CubeIDE. Features: Original WeAct Studio STM32C011 development board STM32C011F6P6 Arm® Cortex®-M0+ microcontroller Maximum CPU frequency of 48MHz 32KB Flash memory and 6KB SRAM USB Type-C connector for power supply Onboard 3.3V voltage regulator User LED, Reset button and Boot button SWD programming and debugging interface Up to 18 GPIO pins 12-bit ADC with multiple analog input channels USART, SPI and I²C communication interfaces DMA controller, RTC and multiple 16-bit timers Low-power Sleep, Stop and Standby modes Operating temperature: -40°C to +85°C Model STM32C011F6P6 Input Voltage 5V (USB Type-C) Core ARM® 32-bit Cortex®-M0+ CPU Frequency Up to 48MHz Flash Memory 32KB SRAM 6KB GPIO Pins Up to 18 GPIOs Analog Peripherals 12-bit ADC (15 Channels) Communication Interfaces 1× USART, 1× SPI, 1× I²C Timers Advanced-control, General-purpose and Basic Timers System Peripherals DMA Controller, RTC, CRC, Independent Watchdog (IWDG), Window Watchdog (WWDG), SysTick Programming Interface SWD (Serial Wire Debug) Operating Voltage 2.0V ~ 3.6V MCU (5V via USB Type-C) Operating Range -40°C to +85°C On-board Features USB Type-C, 3.3V LDO, User LED, Reset Button, Boot Button Product Dimensions Approximately 38 × 20 mm Product Weight 10 grams Schematic Click Here to Download Schematic Official Product Page Official STM32C011 Product Page Datasheet Click Here to Download Datasheet Reference Manual Click Here to Download Reference Manual GitHub Repository WeAct Studio Official Repository Tutorials STM32 Tutorials by ControllersTech Videos STM32 Video Tutorials Country of Origin : China Note: Header pins are not soldered and are supplied separately in the package. HSN Code: 85176290 1 × WeAct Studio STM32C011 Development Board 2 × Male Pin Headers