Votatec PL Lamp 5CCT Adjustable LED Replacement Lamp – G24q/GX24q 4-Pin Base – 9W / 16W

Upgrade existing CFL fixtures with the Votatec 5CCT Adjustable LED PL Lamp. Designed as an energy-efficient replacement for compatible G24q and GX24q 4-pin CFL lamps, this Type A+B LED lamp supports both compatible ballast operation and ballast-bypass direct-wire installation. The built-in colour temperature selector allows you to choose from 2700K, 3000K, 3500K, 4000K, or 5000K before installation. Its adjustable lamp head tilts up to 90°, while the rotating and extendable base helps position the lamp properly inside different fixture configurations. Key Features 5CCT selectable: 2700K / 3000K / 3500K / 4000K / 5000K Available in 9W and 16W Type A+B LED PL lamp Compatible with G24q and GX24q 4-pin bases Adjustable lamp head with up to 90° tilt Rotating and extendable lamp base 120° beam angle CRI 80 AC 120–277V 50,000-hour rated lifespan IP20 rated Suitable for damp locations Rated for enclosed fixtures Non-dimmable Mercury-free construction cUL and FCC certified DLC 6.0 Standard 5-year warranty Specifications Specification 9W 16W Wattage 9W 16W CFL Equivalent 26W CFL 32W / 42W CFL Maximum Lumen Output Up to 1,100 lm Up to 1,850 lm Base G24q / GX24q 4-Pin G24q / GX24q 4-Pin Lamp Type Type A+B Type A+B Colour Temperature 2700K / 3000K / 3500K / 4000K / 5000K 2700K / 3000K / 3500K / 4000K / 5000K Voltage AC 120–277V AC 120–277V CRI 80 80 Beam Angle 120° 120° Rated Life 50,000 Hours 50,000 Hours Power Factor >0.9 >0.9 IP Rating IP20 IP20 Length 6.77 in / 172 mm 6.77 in / 172 mm Diameter 2.36 in / 60 mm 2.36 in / 60 mm Finish White White Dimmable No No Warranty 5 Years 5 Years Available Models 9W – LEDPL-9-G24Q-8SC1-HYB Replaces approximately 26W CFL lamps and produces up to 1,100 lumens. 16W – LEDPL-16-G24Q-8SC1-HYB Replaces approximately 32W or 42W CFL lamps and produces up to 1,850 lumens. Installation Notice This LED PL lamp is compatible with both G24q and GX24q 4-pin installations. For ballast-operated installation, confirm that the existing electronic ballast appears on the manufacturer’s approved ballast compatibility list. If the existing ballast is not compatible, the ballast must be bypassed or removed and the lamp connected directly to the power supply according to the manufacturer’s wiring instructions. Installation should be completed by a qualified electrician in accordance with applicable electrical codes. Download Product Spec Sheet