AlbaChem® S.P.I.F. PLUS Cured Ink Remover #1290

AlbaChem® S.P.I.F. PLUS Cured Ink Remover is a powerful professional spot-cleaning solution designed to remove cured plastisol ink, most water-based screen printing inks, and adhesives from textiles. Ideal for screen printing shops, garment decorators, and production facilities, S.P.I.F. PLUS helps rescue shirts and other printed textiles when unwanted ink, misprints, or adhesive residue need to be removed. Its slow-evaporating ester-solvent formula provides more working time and reduces product loss through evaporation compared with fast-drying spotting chemicals. Powerful Cured Screen Printing Ink Remover S.P.I.F. PLUS is formulated specifically for textile spot cleaning and can remove: Cured plastisol screen printing ink Most water-based inks Screen printing ink stains and misprints Adhesive residue Ink from a wide variety of textiles For best results, S.P.I.F. PLUS should be used with a professional spot cleaning gun and an air drying gun capable of more than 100 PSI. Benefits of AlbaChem S.P.I.F. PLUS Removes cured screen printing ink from textiles Effective on plastisol and most water-based inks Removes many adhesive residues High flashpoint Higher TLV than standard chlorinated solvents No California Prop 65 chemicals No PFAS ingredients No cancer warnings Pleasant mild/floral odor Slow evaporation helps reduce product loss No Hazardous Air Pollutants (HAP) No ozone-depleting substances No SARA 313 chemicals Not regulated for ground transportation Slow-Evaporating Formula for Professional Spot Cleaning Unlike traditional cured ink removers that can evaporate very quickly, S.P.I.F. PLUS is intentionally slow evaporating. This gives the cleaner more time to work on difficult cured ink stains while helping reduce solvent loss. Because of the slower evaporation rate, a high-pressure air drying gun of more than 100 PSI is recommended to remove excess liquid and speed the drying process. How to Use AlbaChem S.P.I.F. PLUS Shake well before use. Pour S.P.I.F. PLUS into the jar of your spot cleaning gun. Place the stained garment on a vacuum cleaning surface to help remove solvent vapors. Spray the cleaner onto the stained area. Work in a circular motion, moving from the outside edge of the stain toward the center. Once the stain has been removed, feather the surrounding area so there is no sharp outline. Using an air drying gun rated at more than 100 PSI, sweep across the wet area to blast excess liquid from the fabric. Repeat if necessary. Technical Information Appearance: Clear, colorless liquid Odor: Mild / floral Chemical Family: Ester solvent blend Water Solubility: Partial VOC: Yes Hazardous Air Pollutant (HAP): No Ozone Depleting Substance: No SARA 313 Chemicals: No Ground Shipping: Not regulated for ground transport Available Sizes 1 Pint – Item #1289 1 Quart – Item #1291 1 Gallon – Item #1290 5 Gallon – Item #1292 55 Gallon – Item #1294 Ideal For Screen Printing Shops When a finished shirt comes off the press with an unwanted ink spot, replacing the garment isn't always the best option. AlbaChem S.P.I.F. PLUS gives professional screen printers a way to remove cured ink and correct many production mistakes before a garment becomes waste. Keep S.P.I.F. PLUS near your spot cleaning gun as part of your screen printing finishing and quality-control setup.