Hoyt Concept XTS 34 TDM

The Hoyt Concept XTS 34 TDM brings Engineered Synergy to a 34-inch shoot-through target platform, combining the XTS Tuning System with the proven Concept riser, SCTR 2.0 cam and high-performance limbs. Its TDM configuration adds further control over draw length, holding weight and the feel at full draw. The Concept XTS 34 TDM retains the proven Concept X geometry and parallel-charging riser design, while refinements contribute to a 4.75 lb bow weight and reduced vibration. The riser geometry is designed to resist lateral loads during the shot. The XTS system places tuning directly at the limb pockets, allowing vertical and lateral paper tears to be adjusted with a wrench and without a bow press. It also provides scope for group tuning, holding-weight refinement, spine-range optimisation and returning to previous tune settings. The SCTR 2.0 cam uses a shorter back end with additional energy stored within the cam, creating a smoother draw cycle while retaining the established SCTR wall characteristics. The TDM configuration provides draw-length adjustment through its module positions and allows the archer to alter holding weight and how firm the bow feels against the wall at full draw. This gives target archers additional control over the final draw and holding characteristics of their setup. The shoot-through riser brings this combination to a 34-inch platform, completed by TXL limbs and WireWRX bowstrings. Proven XTS Tuning System for vertical and lateral adjustment Wrench-operated tuning without pressing the bow XTS supports paper, group and holding-weight tuning SCTR 2.0 cam with smoother draw cycle TDM module offers adjustable full-draw feel Refined Concept riser reduces weight and vibration Parallel-charging riser design resists lateral loads Shoot-through riser design for the 34-inch platform Modular Grip System with interchangeable grip angles TXL limbs with WireWRX bowstrings