Pipe Freezing Kit - 8-28mm, -50°C Ice Plug, 415ml Can + 2 Disposable Jackets | FBI8-28

The freezeBOSS Intense pipe freezing kit forms a temporary ice plug inside a live water line so you can cut in, repair or extend pipework without shutting off the mains or draining the system. It suits steel, copper and plastic pipe from 8mm to 28mm. The refrigerant freezes down to -50°C and typically forms a plug within minutes. Once formed, the plug holds pressures over 230psi, well above normal domestic mains pressure, and lasts up to 45 minutes. That leaves time to finish a tap, valve or fitting change. The kit comes with one 415ml Intense can and two disposable jackets, so it's worth keeping one in the van for emergency call-outs and isolation jobs where no stop valve is available. Specifications SKU FBI8-28 Pipe size range 8-28mm Pipe materials Steel, copper, plastic Freeze temperature Down to -50°C Plug pressure rating Over 230psi (approx. 1,585kPa) Plug duration Up to 45 minutes Refrigerant can freezeBOSS Intense, 500g / 415ml Jackets 2 x disposable, 8-28mm Coverage per can 2 freezes up to 15mm, or 1 freeze up to 25-28mm Kit Contents 1 x freezeBOSS Intense 415ml refrigerant can 2 x disposable 8-28mm freezing jackets Features Repairs and alterations without shutting off the mains Fast-acting freeze, typically within minutes Ice plug holds over 230psi for up to 45 minutes Works on steel, copper and plastic pipe No draining down or refilling the system Low-cost disposable jackets Replacement cans (FBI-E500) and jackets (FBI-J) available separately Always follow the instructions on the can. Use in a ventilated area and wear gloves and eye protection when handling refrigerant.