ESP32 BME280 & BH1750 Environment Station Kit with OLED

Build an indoor sensing prototype with the ESP32 BME280 & BH1750 Environment Station Kit. The BME280 measures temperature, humidity and air pressure, while the BH1750 supplies digital ambient-light readings. Develop your own ESP32 firmware to collect the data, show results on the 0.96-inch white SSD1306 I2C OLED, or add Wi-Fi logging and automation. The pre-soldered 38-pin ESP32 USB-C board has 4MB flash, and a 400-point breadboard and 10cm jumpers support the wiring. The components require assembly and software setup, and the supplied parts are not weatherproof.Bundle value: Purchased separately, the included component variants total $43.59. This kit is $36.99, saving $6.60. 1 × pre-soldered 38-pin ESP32 USB-C board with 4MB flash 1 × pre-soldered BME280 temperature, humidity and pressure sensor 1 × pre-soldered BH1750 digital light sensor 1 × 0.96-inch white SSD1306 I2C OLED display 1 × 400-point solderless breadboard 1 × 120-piece, 10cm jumper wire set Wiring and firmware setup are required, including any Wi-Fi features you want to develop. USB-C data cable, computer, power source and enclosure are not included. The supplied parts are not weatherproof; outdoor use requires appropriate protection.Read the kit setup guide for assembly planning, required extras and component references.