Amped Outdoors 2 Bank 12V On-Board Battery Charger

The Amped Outdoors 2 Bank 12V On-Board Battery Charger is designed to charge up to two 12V batteries using two charging banks, each delivering a maximum output of 10A. It provides a convenient charging solution for fishing boats equipped with separate 12V batteries or a compatible 24V battery system consisting of two 12V batteries connected in series. Each bank features selectable charging modes for LiFePO4 lithium, AGM, and flooded lead-acid batteries. With IP67-rated waterproof construction, a lithium battery wake-up function, and integrated electrical protection, this charger is designed for permanent on-board marine installations. WHY THE AMPED OUTDOORS 2 BANK CHARGER WORKS Flexible Charging for 12V and 24V Battery Systems: Two 12V charging banks allow you to charge two individual 12V batteries. This includes compatible 24V systems made from two 12V batteries connected in series, with each battery charged through its own 12V bank. Selectable Battery Modes and Lithium Wake-Up: Choose the appropriate charging mode for LiFePO4 lithium, AGM, or flooded lead-acid batteries. The lithium wake-up function can help reactivate compatible batteries in low-voltage protection mode by holding the bank's mode button for 3 to 5 seconds. Waterproof Construction and Integrated Protection: The IP67-rated epoxy-filled housing is designed for marine environments. An aluminum heat-dissipation plate and waterproof cooling fan work alongside short-circuit, reverse-polarity, overcharge, and overtemperature protection. The Amped Outdoors 2 Bank 12V On-Board Battery Charger is particularly useful for fishing boats equipped with two 12V batteries, including compatible 24V trolling motor battery systems. Its on-board design simplifies battery charging and maintenance between fishing trips. PRODUCT SPECIFICATIONS Brand: Amped Outdoors Model: AO-0325FM (confirmation required) Product Type: 2 Bank 12V On-Board Battery Charger Number of Banks: 2 AC Input: 105–125V AC, 60Hz DC Output: 2 × 12V / 10A maximum per bank Supported Battery Types: 12V LiFePO4 lithium, AGM, and flooded lead-acid Battery System Configurations: Two individual 12V batteries, including compatible 24V systems using two 12V batteries in series Dimensions: 166 × 245 × 99 mm (6.5" × 9.6" × 3.9") LED Indicators: Power, battery type, and charging status Lithium Activation: Low-voltage wake-up function (hold mode button for 3–5 seconds) Full Cut-Off Voltage – 12V Lead-Acid: 14.1–14.4V per bank Full Cut-Off Voltage – 12V AGM / LiFePO4: 14.4–14.7V per bank Cooling: Aluminum heat-dissipation plate and waterproof cooling fan Waterproof Rating: IP67 Electrical Protection: Short-circuit, reverse-polarity, overcharge, and overtemperature Operating Temperature: -10°C to 40°C Nominal Operating Temperature: 25°C Relative Humidity: 5%–95% Important Compatibility Note: This charger provides two individual 12V charging outputs, not a dedicated 24V output. For a 24V system made from two 12V batteries connected in series, each battery must be charged through its own bank. Before charging batteries connected in series, confirm that the battery manufacturer permits this charging arrangement and follow the charger's installation instructions. This charger is not intended to charge a single 24V battery directly. View Amped Outdoors Warranty Information