Bambu Lab PETG Basic 1.75mm Filament 1kg Refill

Bambu Lab PETG Basic Refill is the cost-effective PETG for prints that need to be tougher than PLA. Bambu's upgraded formula now matches the strength of PLA Basic while keeping the toughness to absorb impacts, so it suits structural household parts and practical tools like holders, wall hooks, brackets and clips. Strong resistance to water, UV and temperature makes it a budget-friendly pick for outdoor prints, from garden labels to bathroom accessories. The refill format skips the plastic spool and comes vacuum-sealed with desiccant. Key Features Strong and tough: bending strength 75 MPa (XY) and 56 MPa layer strength (Z), with 34.2 kJ/m² impact strength, well above PLA Basic's 20.6 Cost-effective for outdoor use with strong resistance to water, UV and heat Less stringing and a smoother surface thanks to lower moisture sensitivity than typical PETG Low indoor printing emissions, certified to UL GREENGUARD 2904 RFID-enabled: all printing parameters load automatically through the AMS 13 colours to choose from, all in the eco-friendly refill format Specifications Material: PETG (Polyethylene Terephthalate Glycol) Filament Diameter: 1.75mm ±0.03mm Net Weight: 1kg Recommended Nozzle Temperature: 230–260°C Recommended Bed Temperature: 65–75°C Bending Strength: 75 MPa (XY), 56 MPa (Z) Impact Strength: 34.2 kJ/m² (XY) Density: 1.25 g/cm³ Drying Conditions: 65°C for 8 hours Storage: Below 20% RH, sealed with desiccant What's in the Box PETG Basic Filament Refill ×1 Desiccant Pack ×1 Instructions ×1 Spool Sticker ×1 Note: This is a refill product, a reusable spool is required. Download and print the official Bambu Lab spool from your printer's built-in files or from MakerWorld, or use the Bambu Reusable Spool. Ideal For Structural household parts, brackets, hooks, clips and tool holders Outdoor prints, garden labels and bathroom accessories Multi-colour projects using the AMS system Makers stepping up from PLA who want a forgiving first PETG Compatibility Compatible with all Bambu Lab printers, all AMS series, all build plates and all nozzles, with full RFID support on X1 Series, P1 Series, A1 Series and H2 Series. Works with any other FDM printer that uses 1.75mm filament and can reach PETG temperatures. Printing Tips Dry before use for best results. If the filament has sat in air above 50% humidity for more than 72 hours, dry it at 65°C for 8 hours before printing. PETG Basic adheres strongly to PEI plates. Let the plate cool before removing the model to avoid damaging the bottom surface. Store in an airtight container with desiccant between prints.