SABER1222 CNC Machine - Masso Controller

SABER1222 CNC Machine - Masso Controller 1.2x2.2m CNC Machine Specs: Rack & Pinion CNC Machine | High-Speed, High-Precision CNC Router Boost your production with the CNC Basix Rack & Pinion CNC Machine, engineered for high-speed cutting, precision accuracy, and industrial reliability. Built on a rigid square tubing steel frame, this CNC router is designed to handle demanding, high-volume environments with ease. Precision Engineering for Maximum Performance The machine features 12mm aluminium Y-axis brackets, eliminating flex and unwanted movement. This ensures consistent cutting accuracy and repeatability, even during intensive production runs. Cutting Capability (830 x 1750mm) The working area is perfect for: Wood sheets Aluminium panels Perspex (acrylic) Composite materials High-Speed Rack & Pinion Drive System The rack & pinion system allows for: Faster cutting speeds Smooth motion control Reliable long-term performance Perfect for businesses needing high output without sacrificing precision. Cutting Performance 4–6mm depth per pass (depending on material and tooling) Excellent results across soft and rigid materials Optimized for production environments Reliable Control System Proven and stable control using Masso delivering: Consistent machine operation Easy setup and control Industry-trusted reliability Advanced Homing & Limit System Equipped with 7 limit switches (A+, A-, Y+, Y-, X+, X-, Z+), enabling: Accurate homing Auto squaring for perfect alignment Soft limits for safety Full axis protection Built for Customization & Upgrades This CNC machine is designed with flexibility in mind. Upgrade options include: Electronic enhancements Mechanical improvements Custom configurations to suit your workflow 1.2x2.2m CNC Machine Features: Footprint: 1200mm x 2200mm at the base *Stock size measured from base Work Area: 830mm x 1750mm x 200mm *Stock size Cutting depth 100mm Depending on type of bit used (Total of 200mm Z-Axis Travel) Open ends allow pass through of longer materials. 50x50x1.6mm 800mm high Square Tubing frame/table painted black Jogging speed 18 000 - 24 000mm/min Cutting speed 1000 - 6000mm/min - depending on cutting bit and material used 2x 3.175mm & 2x 6mm cutting bits Collets 3mm, 4mm, 6mm & 8mm Electronics controller box 32" Screen, wireless keyboard and mouse Full HGR20 linear rail management with rack & pinion for X axis with cable drag chains Full HGR20 linear rail management with rack & pinion for Y axis with cable drag chains Full HGR15 linear rail management with SFU1605 ball screw for Z axis with cable drag chains 80x120 Aluminium extrusions for Y and X axis 2.2kw Air Cooled Spindle & VFD Kit Manual Speed Controlled between 12 000 RPM – 24 000 RPM. Full limit switches, hard stop Auto homing and auto squaring User Setup G54 - G59 Capability *The machine comes with a square tubing table with a MDF wasteboard including fastening clamps. Requirements: Personal computer or Laptop running Windows 7, 8 or 10 for designing and saving of G-Code USB Memory Stick Easel 30 Days Free Trial - Online Cloud Based App used for designing and cutting process. R450 per month or R4000 for 12 months - depending on rand/USD exchange rate Alternative designing software: Vectric - Basic training available at additional costs Fusion 360 - Basic training available at additional costs Mechanical Specifications: 4x Nema 34 stepper motors 4.5N.m Full HGR20 linear rail management with rack & pinion for X axis with cable drag chains Full HGR20 linear rail management with rack & pinion for Y axis with cable drag chains Full HGR15 linear rail management with SFU1605 ball screw for Z axis with cable drag chains Dual motors on Y axis. 7x Proximity Sensors - 2 on each axis (A+, A-, Y+, Y-, X+, X-, Z+) Repeatability 0.05mm Accuracy 0.05-0.1mm Electronics Specifications: Masso 3 Axis Stepper Motor Driver Controller Board 24V 17A 400W Power Supply 230v AC Power Socket - Power Cable Provided Emergency Stop Button All connecting fittings and cables MASSO G3 Powerful. Stable. Guaranteed. MASSO G3 is the most stable, reliable and easy-to-use CNC controller money can buy. Escape the reliability issues of PC-based controllers, which are vulnerable to external design flaws, incompatible software updates and viruses. No need to worry about installing drivers or motion cards, just wire the MASSO to your motor drives and enter calibration values to start machining. With MASSO G3 you get: Fully integrated hardware and software specifically designed to run CNC machines independently of a PC. Lathe, Mill, Router, Plasma or WaterJet machine control with 3-axis control. Built-in Wi-Fi for PC connectivity via MASSO-Link software. Remotely monitor machine status and send g-code files. Simple, easy-to-use screen layout. Tool path display so you can see and position your job in real time. Four USB ports to directly connect keyboard, mouse, touchscreen and pen drive without the need for a USB hub. Direct spindle control and MPG handwheel dial support. The machine can be upgraded with the following: 2.2kW Water Cooled Spindle Kit | 3kW Air Cooled Spindle Kit | MPG Pendant UPGRADES: 2.2kW Water Cooled Spindle Kit Specification: 2.2kW Water-cooled spindle kit. This kit includes the spindle, aluminium mounting bracket, VFD, 4 additional collets (3mm, 4mm, 6mm & 8mm), water pump and 6m of water tubing. The only thing you will need to run the spindle is the cable between the spindle and the VFD, the power cable to the VFD and a water bath for the water pump. 2.2kW Water-cooled Spindle for CNC machine. This is a 3-phase spindle designed to work with a 2.2kW Variable Frequency Drive (VFD). It has a built in ER20 Collet holder which can mount from 1mm to 13mm cutting bit shaft sizes. The spindle is mounted to the gantry of the CNC machine with an aluminium bracket. The rotor of the spindle is mounted with 2 bearings at the bottom of the spindle and 2 bearings at the the top, to ensure a long service life. This spindle is perfect for milling and engraving of wood, plastic, foam, aluminium, brass, steel and even stone. Specification: Diameter: 80mm Power: 2.2KW Current: 10A Voltage: 220V Frequency: 0-400Hz Speed: 10-24000rpm Collet Size: ER20 Cooling: Water Cooled Runout: 0.003mm - 0.005mm Bearings: C7002 x 2, C7005 x 2 Collet size in spindle: 1/8' (3.175mm) Additional collet sizes: 3mm, 4mm, 6mm & 8mm 2.2kW Variable Frequency Drive (VFD) to drive a CNC machine spindle. This drive can be controlled via hand or via a controller board. There are a wide range of settings to fine tune the way the spindle is controlled and also comes with a manual with more details of each setting. The VFD run off single phase 220V AC and the output is also 220V provided to the spindle. It also comes with self controlled built in cooling which switches on when required. VFD Specification: Power: 2.2KW Input Voltage: 220V AC (Single Phase) Output Voltage: 220V Output Current: 10A Input Frequency:50-60Hz Output Frequency:0-400Hz Input phase: Single phase Output phase: 3 phase Size: 170 x 125 x 163mm Control: By hand via built in control panel or via digital signal from controller board 3kW Water Cooled Spindle Kit Specification: This is the CNC Spindle Motor Air Cooled 3KW Kit. The CNC Spindle motor Air Cooled Spindle 3KW has 4 Bearings & 3.0kw VFD/inverter variable frequency driver spindle speed controls. This is the squared spindle design. It is used for Milling / Engraving and various types of projects. Product Specs: Material: Stainless steel jacket, copper coil! Application: Milling / Engraving Cooling: Air cooling mode Power Interface: Optional GX16 air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground Power: 3KW Voltage: 220V Current: 10A Runout Off: 0.003-0.005mm Diameter(mm):105 Bearing type: 4 Bearing ,Angular contact bearings,P4 grade,2X7005C P4 DT and 2X7003C P4 Collet: ER20 Air Cooling ER20 collet chunk Grease Lubrication Phase: 3HP Package Weight: 11.0 Kg VFD Specification: Input Voltage: 220V(+/-15%) ,We also stock 380V(+/-15%), please contact us. Output Voltage: 220VAC Input Frequency: 48-63 Hz Output Frequency: 0-400 Hz Input Phase: 1 or 3 phase Output Phase: 3 phase MPG Pendant Specification: High quality MPG Pendant for CNC machines. This is a general wired CNC pendant that can control up to 4 Axis CNC machines. It is made from a tough soft touch plastic with metal casing on the inside. The buttons and dial have a solid and quality feel to it which makes it easy to control your CNC machine. On the pendant you can select the axis you want to move and the size of increments you want to move at with the dial. It also includes a clip to hang the pendant when not in use and a magnet backside to be able to attach the pendant to any metallic surface. This pendant is a generic MPG pendant. We sell it prewired for the DDCS V3.1 CNC controller. Specifications: Number of axis: 4 axis Increments: 1x, 10x and 100x Emergency stop: Yes Cable length: 2m with pigtail section for extra stretch. Please allow 14-21 working days for the machine to be ready. Please allow 3-7 working days for delivery – depending on the delivery address. Compulsory delivery, setup and minimal training of the machine at additional costs to the customer - within South Africa only.