Shelly BLU Door/Window ZB Farbe Braun

Smarter Bluetooth- und Zigbee-Sensor für Türen und Fenster. Er erkennt den Status (geöffnet/geschlossen) und misst zusätzlich die Umgebungshelligkeit. Hauptmerkmale Zwei Verbindungsoptionen: Bluetooth 5.0 und Zigbee Lange Batterielaufzeit: Bis zu 5 Jahre mit der im Lieferumfang enthaltenen 3V CR2032-Batterie Zuverlässige Erkennung: Erkennt Tür- und Fensterbewegungen in Echtzeit Winkelmessung: Misst den Neigungswinkel – ideal für Dreh-Kipp-Fenster Lichtsensor: Misst Umgebungshelligkeit für dynamische Lichtsteuerung Verschlüsselte Kommunikation: AES-Verschlüsselung (CCM-Modus) sorgt für sichere, kabellose Verbindung Kompakt & leicht: Für eine unauffällige und vielseitige Installation Beacon-Modus: Sendet regelmäßige Status-Updates Shelly BLU Door/Window ZB (the Device) is a Bluetooth sensor designed to detect the opening and closing of a door or a window. It can also measure the tilt angle of a turn-and-tilt door or window. In addition, it features a light sensor. Main features Zigbee 3.0 and Bluetooth 5 LE connectivity, with support for simultaneous Zigbee + Bluetooth operation Supports BTHome for compatible Bluetooth-based automations and integrations Long battery life for low-maintenance operation Door/window inclination angle measurement for detecting tilt/vent positions, not just open/close Illumination measurement to trigger automations based on ambient light levels Encrypted mode for protected communication Main applications Residential: single-family homes, apartments, condominiums Light commercial: small office buildings, retail stores, restaurants, gas stations Government / municipal: public buildings and facilities Educational institutions: universities and colleges Connectivity Bluetooth Zigbee Modes of operation Regular mode: The Device broadcasts the current open or closed state, illuminance, and battery status each time the open/closed state changes (door/window opened or closed). If a tilt-and-turn door or window is opened, the Device immediately broadcasts information about the event, the illumination, and the battery status at the time of detection. Two seconds later, it broadcasts tilt angle, illumination, and battery status. Every 8 seconds, the Device checks the tilt angle. If a change is detected, the Device broadcasts the updated angle. Beacon mode: The Device broadcasts the current open and closed state, illuminance, and battery status every 30 seconds. You can enable Beacon mode in the settings in the Shelly Smart Control settings. For more details, visit the Shelly Smart Control guide. The battery life may be significantly reduced when the Device is in Beacon mode. User interfaces One push button Press 4 times quickly to put Shelly BLU Door/Window ZB into pairing mode. The LED flashes once every 2 seconds for 1 minute. Press 5 times quickly to activate Zigbee pairing. The LED flashes twice every two seconds for 1 minute. Press and hold for 30 sec to factory reset. Specifications Type Value Physical Size (HxWxD): 35x35x7 mm ±0.5 mm / 1.38х1.38х0.27 in ±0.02 in (Sensor unit) 35x12x7 ±0.5 mm / 1.44х0.47х0.27 in ±0.02 in (Magnet) Weight: 10 g ±1 g / 0.35 ±0.05 oz (Device with the battery) 8 g ±1 g / 0.28 ±0.05 oz (Magnet) Shell material: Plastic Color: White, black, brown Environmental Ambient temperature: -20 °C to 40 °C / -5 °F to 105 °F Humidity: 30 % to 70 % RH Electrical Power supply: 1x 3 V CR2032 battery (included) Battery life: 5 years Sensors Reed switch Yes G-sensor Yes Light sensor Yes Radio RF band: 2402 - 2480 MHz Max. RF power: <8 dBm Bluetooth Protocol: 5 (LE) Bluetooth Range: Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors (Depends on local conditions) Zigbee Protocol: 802.15.4 RF band: 2405 to 2480 MHz Max. RF power: < 8 dBm Range: Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors (Depends on local conditions) MCU CPU: EFR32MG27 Flash: 768 kB Firmware capabilities Schedules: No Webhooks (URL actions): No Scripting: No MQTT: No Encryption: Yes Other Supported Devices Shelly Plus / Gen3 / Gen4 series Shelly Pro series