EyZEE 90mm Zigbee Gimbal Downlight RGB + CW

90mm Zigbee 3.0 Smart Gimbal Downlight Australia - EyZEE® Adjustable LED Lighting Adjustable Beam. Full Colour. 90mm Cut-out. Meet the EyZEE® 90mm Zigbee 3.0 Smart Gimbal Downlight — a premium LED downlight designed for Australian ceilings with a 90mm cut-out, featuring a tilt-adjustable gimbal so you can aim light exactly where you want it. Enjoy RGB + full-range tuneable white (CCT) from 3000K–6000K, plus deep dimming down to 1% for proper mood control — from bright task lighting to subtle ambience. 📦 Coming Late April / Early May This new EyZEE® gimbal model is landing soon. Keep an eye on this page for stock updates. Why Choose EyZEE® Smart Gimbal Downlights? 🎯 Adjustable Gimbal Aim Angle the light to highlight benches, artwork, feature walls or walkways. 🔦 60° Beam Angle A more focused beam that suits feature lighting and “put light exactly there” installs. 🌈 RGB + Full CCT Range Go colourful, or dial in the perfect white tone from 3000K–6000K. 🔅 Dims Down to 1% From bright and practical to soft and subtle — without harsh jumps. Smart lighting should feel effortless — aim it, dim it, colour it, and set the vibe whenever you want. 90mm Smart Gimbal Downlight Specifications - Australian Standard Installation & Physical: Ceiling cut-out: Ø90mm Outer diameter: Ø105mm Height: 73mm IP rating: IP44 Materials: Plastic + Aluminium Power lead: 0.6m cable with AU plug Input voltage: AC 220–240V Packaging: Environmentally responsible Smart Features & Performance: Protocol: Zigbee 3.0 (hub required) Power: 8W LED Light output: 650–700lm Beam angle: 60° Colour modes: RGB + CCT (3000K–6000K) Deep dimming: down to 1% LED type: SMD 2835 + lens Certifications: RCM, IC-4, CRI 80+ Warranty: 12 months Installation: Many modern homes have a downlight power plug in the ceiling for a simple unplug-and-plug-in swap. If your existing lights are hardwired (common in older homes), installation must be completed by a licensed electrician. *NOTE: Under the Electrical Safety Act and AS/NZS3000 all electrical work must be carried out by a licensed electrician. Note: Trade names belong to their respective trademark owners.