4ft x 7ft Clear Clothes Rail Cover

Dust is the invisible cost of uncovered storage. Garments on an open rail in a stockroom, a warehouse or a back-of-house storage area collect a fine layer of dust from the air, from shelf activity above, from foot traffic and from the general movement of goods around them. The dust settles on shoulders, collars and exposed surfaces. It dulls dark fabrics, marks light ones and gives every garment on the rail the look of stock that has been sitting rather than stock that is ready to sell, wear or present. The cost is not the dust itself. The cost is the time spent steaming, pressing, brushing and preparing every garment before it reaches the shop floor, the customer, the wardrobe department or the event. A clear PVC rail cover eliminates that cost entirely by preventing the dust from reaching the garments in the first place. The heavy-duty full-length zip is the access mechanism that makes the cover practical for daily stockroom use rather than just long-term storage. The zip runs the complete height of the cover from top to bottom. One pull opens the entire rail from end to end. Staff reach in, pull what they need, rezip and the remaining garments are sealed again in seconds. There is no lifting the cover over the top, no reaching through a partial opening, no disturbing the garments on either side of the one being removed. During seasonal stock rotations, end-of-line clearances and daily shop-floor replenishment, the full-length zip means the cover supports the workflow rather than slowing it down. The clear PVC material is the detail that separates this cover from the opaque alternatives on the market. An opaque cover protects garments but hides them. A member of staff looking for a specific item on a covered rail has to unzip, search, identify and rezip every cover on every rail until they find it. A transparent cover lets them see the contents from outside without opening anything. In a busy stockroom with ten, twenty or fifty covered rails, that visibility saves significant time across every shift. For costume departments, wardrobe stores and fashion retailers where specific pieces need to be located quickly, the transparency is not a convenience. It is a workflow requirement. At 1220mm wide, 2210mm tall and 510mm deep, the cover is sized to fit 4ft heavy duty clothes rails with full clearance for loaded hangers. The height accommodates rails with extension bars fitted, which is important for two-tier rails like the RA1590X that extend to approximately 2160mm with the bars in place. The 2210mm cover height provides approximately 50mm of clearance above the extended rail, enough for the cover to sit over the top without compression. The 510mm depth allows for the natural bulk of hanging garments, coats and jackets without compressing them flat against the sides, which would cause creasing and defeat the purpose of protecting presentation quality. This is a Displaysense exclusive, designed specifically for our heavy duty clothes rail range. The PVC is heavy-duty, not the thin film used on disposable dust covers that tear after a few uses. It is built for repeated daily use in commercial environments, wipes clean with a damp cloth, and the zip mechanism operates smoothly after hundreds of open-close cycles throughout its working life. What Ships in Your Pack 1 x 4ft x 7ft clear PVC clothes rail cover with heavy-duty full-length zip Covering Multiple Rails? For stockrooms, warehouses and retail back-of-house areas covering several rails, contact our team for multi-unit pricing. The cover fits all 4ft rails in our heavy duty range. Call us on 01279460460 or send us your requirements. 4ft x 7ft Clear Rail Cover. PVC. Full-length zip. Fits 4ft rails. Displaysense exclusive. Reusable.