Altelix 14x11x9 Polycarbonate Vented Enclosure with Cooling Fan, 120 VAC Outlets, & Power Cord

Features Thermostat controlled cooling fan to help expel heat Dual vents with rain shields and screens No electrical wiring required Available with either (2) or (4) internal pre-wired 120VAC power outlets Pre-wired 5 foot 3-prong power cord Integral internal mounting bosses for use with equipment mounting plates or DIN rails Durable Polycarbonate + ABS construction Weatherproof and UV Stable Meets NEMA 3R, 3RX and IP24 Extra deep gasketed lid with dual stainless steel latches Tamper-Proof locking screw with key and provision for padlock Can be mounted using external feet or internal mounting points RF transparent for wireless devices Multiple size knock-out holes on bottom of enclosure Includes (2) locking keys, cable grommets, cable glands, zip ties, hook-n-loop tape and wall mounting hardware Optional pole mount kits and utility shelf available Applications Indoor / Outdoor WiFi access points and routers Multi purpose utility box Home automation WiFi, LoRa and RFID gear Security and surveillance systems LED controllers IoT devices Network switches Media converters Cable TV and CCTV amplifiers Broadband equipment SCADA remote terminal Outdoor weather protection Protection against theft or damage Warehouses and public areas Concealment of equipment The Altelix NP141109VFA1C NEMA enclosure is simple to install because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Get your project up and running quickly and transition to hard-wired later if needed. The power cord can removed and the power receptacle can be hard-wired by a qualified installer. Available with (2) or (4) 120VAC Power Outlets This enclosure is available with either (2) or (4) internal pre-wired (NP141109VFA1R4C) 120VAC power outlets used to provide power to installed equipment. Mounted to the bottom of the enclosure they do not interfere with area used for installing equipment. Increased Interior Space This enclosure features an extra deep gasketed lid, over 4 inches deep. With the generous size of this enclosure and extended lid the NP141109VFA1C can accommodate a wide range of equipment. Cooling Fan Ventilation The NP141109VFA1C features dual vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure. Equipment Mounting Options This enclosure provides multiple ways to install equipment. Raised bosses located in the base of this enclosure can be used to mount an equipment plate. These same bosses can also be used to install up to four 35mm Top Hat DIN Rail kits available from Altelix. A large flat section is also provided in the base for use with the hook-n-loop tape included in the accessory kit. RF Transparent Design The NP141109VFA1C is ideal for WiFi applications. The non-metallic design of the enclosure will not interfere with the radio's operation. The size of this enclosure will fit a wide range of popular wireless access points on the market. Secure Your Equipment These NP series enclosures feature dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided. Polycarbonate + ABS Protection Built to Last This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. This enclosure can be easily drilled and modified by the installer to suit unique site requirements. Complete with Cable Grommets and Wire Management Accessories This enclosure includes an assortment of cable grommets and cable glands that can be installed in the knock-out holes for a weather resistant seal. Also included in the accessory kit are wall anchors, zip ties, wire management loops, hook-n-loop tape, ground wire, (2) door locking keys and more. Multiple Mounting Options This enclosure features (4) external mounting feet which can be used for wall mounting or with our optional pole mounting kit.