Ace Air 1.5 Ton 15.0 SEER2 R32 Air Conditioner Split System | AAD-GLXS4BA1810A/ AMST24BU1300A

Complete AC Split System 1.5 Ton · 15.0 SEER2 Cooling System R-32 Refrigerant Single-Stage Scroll A complete, factory-matched cooling system. This kit pairs an R-32 outdoor condenser with a Multi-Position ECM air handler — both engineered to work together as an AHRI-certified system. In addition, we sell a factory-matched 5 kW HKTSN05X1 electric heat kit for this air handler, providing approximately 17,000 BTU/h of supplemental electric heat in addition to cooling. System Performance at a Glance 1.5 Ton Nominal Capacity 18,000 BTU/h Cooling 15.0 SEER2 Cooling Efficiency 3/4 HP ECM Blower 72 dB Outdoor Sound What's Included in This System Two matched components, designed and certified to work together 1 Outdoor Condenser AAD-GLXS4BA1810A R-32 outdoor unit — the heart of the cooling system. Houses the compressor and outdoor coil; sits on a slab beside your home. Tonnage1.5 Ton SEER2 Rating15.0 CompressorSingle-Stage Scroll Sound Level72 dB RefrigerantR-32 2 Indoor Air Handler AAD-AMST24BU13 Multi-Position ECM air handler with built-in R-32 evaporator coil. Installs in any of four orientations; accommodates field-installable electric heat kits. CabinetB · 17-1/2" InstallationMulti-Position Blower Motor3/4 HP Multi-Speed ECM Evaporator CoilBuilt-in, R-32 Electric Heat KitField-installable (sold separately) Why R-32 Refrigerant? R-32 versus the older R-410A standard Feature R-32 (This System) R-410A (Old Standard) Energy Efficiency Up to 10% higher Baseline Refrigerant Charge Required Up to 30% less Standard Thermodynamic Performance Superior heat transfer Standard Regulatory Status Future-ready AIM Act phase-down Complete System Specifications Full details for AAD-GLXS4BA1810A/ AAD-AMST24BU13 System Overview Nominal Capacity 1.5 Ton Cooling Capacity 18,000 BTU/h SEER2 Rating 15.0 Heating ~17,000 BTU/h via add-on HKTSN05X1 electric heat kit (5 kW) Refrigerant R-32 Outdoor Condenser — AAD-GLXS4BA1810A Compressor Single-Stage Scroll Sound Level 72 dB Indoor Air Handler — AAD-AMST24BU13 Installation Multi-Position (Upflow / Downflow / Horizontal L / Horizontal R) Cabinet B (17-1/2" wide) Blower Motor 3/4 HP Multi-Speed ECM Evaporator Coil Built-in, R-32, factory-installed TXV Electric Heat Kit Field-installable (sold separately) Warranty Coverage Coverage that kicks in at registration 10 Year Parts Limited Warranty (All Components) 10 Year Compressor Limited Warranty (Outdoor Condenser) Register each component within 60 days of installation. See official Ace Air warranty documents for complete terms and conditions. Documentation Manufacturer spec sheets for this system AC Condenser Spec Sheet PDF — Tap to downloadAir Handler Spec Sheet PDF — Tap to download Frequently Asked Questions What comes in this kit? Two components shipped together: (1) the outdoor condenser AAD-GLXS4BA1810A and (2) the indoor air handler AAD-AMST24BU13. Line set (refrigerant tubing), thermostat, ductwork, condensate drain, and electrical wiring are NOT included — your HVAC contractor supplies those based on your home's install needs. The 5 kW HKTSN05X1 electric heat kit is included and ships installed in the air handler. Does this system provide heat? This system is cooling-only as shipped. We sell a factory-matched 5 kW HKTSN05X1 electric heat kit for this air handler, providing approximately 17,000 BTU/h of supplemental electric heat. For more efficient heating in cool weather, consider a Heat Pump Split System instead — heat pumps move heat rather than generating it through resistance, which saves energy. Why buy as a matched kit vs. separate components? Matched systems are AHRI-certified to deliver their published SEER2 rating. Mix components from different model families and you'll often get lower real-world efficiency and hassles with warranty claims. The factory match also makes sure refrigerant line sizing, TXV calibration, and airflow are right from day one. What does AHRI-certified mean? AHRI independently tests and certifies matched HVAC system combinations. An AHRI certificate confirms a specific condenser + air handler combination hits the stated SEER2 rating under standardized test conditions. Utility rebates and tax credits often require AHRI-certified matched systems — your contractor can provide the certificate for this combination. What is R-32 refrigerant? R-32 is replacing R-410A as the standard residential refrigerant. It runs more efficiently, uses roughly 30% less charge per system, and has a lower climate impact. EPA and AIM Act rules are phasing out R-410A. Not backward-compatible with R-410A equipment. What size home does this system cover? A 1.5-ton system typically handles homes in the 600–900 sq. ft. range for cooling — small homes, condos, guest houses, or finished basements. Climate, insulation, window area, and home layout all change the math. A professional Manual J load calculation is the right way to confirm sizing for your home. Can I install the air handler in any orientation? Yes — the AAD-AMST24BU13 is a Multi-Position air handler. All four install orientations work: upflow, downflow, horizontal-left, horizontal-right. Your contractor picks the orientation based on your ductwork layout and available install space. Will this fit my existing ductwork? For a 1.5-ton system the airflow is modest — most existing residential ductwork handles it without issue. Your contractor will measure static pressure to verify. The air handler cabinet is B (17-1/2" wide). How do I register the warranty? Register each component separately at Ace Air's warranty page within 60 days of installation. You'll need the model number and serial number (from each data plate), install date, and installing contractor info for both the condenser and air handler. Miss the 60-day window and you drop to the shorter base warranty.