DeepCool CC360 ARGB Black mATX Mini Tower Case - 3x ARGB Fans

The DeepCool CC360 ARGB is a Micro-ATX mini tower case built for builders who want good airflow and expandability without complexity. It ships with three pre-installed ARGB fans, a tempered glass window, and room for large liquid coolers, making it suited to mid-range gaming and workstation builds.Why This Product Three ARGB fans pre-installed — Two 120mm fans mount to the front and one to the rear, all with ARGB lighting included. No separate fan purchase needed to get started. Supports 360mm liquid coolers — Enough space for a 360mm radiator in front or 240mm on top, plus room for high-end air coolers up to 165mm tall. Mesh panels for airflow — Perforated front panel and large mesh top panel keep air moving through the case without obstruction. Full tempered glass window — Crystal-clear side panel shows off your build while the case is built from ABS plastic and steel for durability. Magnetic dust filter on top — Removable filter catches dust while letting exhaust air escape, keeping internals clean with minimal maintenance. At a Glance Form factor Micro-ATX mini tower Dimensions 418 × 215 × 431mm Weight 4.9kg Pre-installed fans 3× 120mm ARGB (2 front, 1 rear) Motherboard support Mini-ITX, Micro-ATX GPU length limit 320mm CPU cooler height limit 165mm Compatibility ✓ Supports Micro-ATX and Mini-ITX motherboards. ✓ Fits graphics cards up to 320mm long. ✓ Accepts ATX power supplies up to 160mm long. ✓ Front I/O includes USB 3.0, USB 2.0, and 3.5mm audio jack. Note: CPU coolers must not exceed 165mm in height to fit under the top panel without modification. Best For / Trade-offsBest for: Builders upgrading to liquid cooling who want pre-installed fans and ARGB lighting out of the box. Compact builds using Micro-ATX or Mini-ITX boards where space efficiency matters. Systems that need four expansion slots and room for two 3.5" drives plus two 2.5" SSDs. Trade-offs: Full-size ATX motherboard builds — this case supports Micro-ATX and Mini-ITX only. Passive or silent cooling setups — the case design prioritises active airflow over silence. Large graphics cards over 320mm in length will not fit. DescriptionSPACIOUS MID-TOWER CASE The DeepCool CC360 ARGB Micro-ATX case offers outstanding value with spacious component compatibility, a crystal-clear tempered glass window, and a total of three pre-installed ARGB fans that get any build started right.ABUNDANT AIRFLOW PERFORMANCE Well ventilated throughout the entire chassis, the CC360 ARGB comes equipped with an airflow front panel and a large mesh top panel to ensure fresh air is circulating.PRIMED AND READY A total of 3 pre-installed ARGB fans delivers big airflow performance ensuring any system build is receiving top-notch cooling capacity. Also, the top panel magnetic dust filter keeps your system clean whilst ensuring high airflow.WIDE COOLING SUPPORT Enough space to support high-performance AIO liquid coolers with room for a 360mm radiator in front or a 240mm radiator on top. Cooling fan support for up to 8x 120mm or 4x 140mm.CRYSTAL CLEAR TEMPERED GLASS WINDOW Showcase your system build with a clean and clear full-sized window.COMPATIBILITY Maximum CPU Cooler Height: 165mm Maximum GPU Length: 320mm Maximum PSU Length: 160mmSTORAGE SOLUTIONS Install up to 2x 2.5" SSDs directly on the backplate and 2x 3.5" HDDs underneath the shroud in a removeable drive cage for adjustability.TOP PANEL MAGNETIC DUST FILTER Keeps the dust out but ensures exhaust air flows out seamlessly.FRONT I/O PANEL Features USB 3.0, USB 2.0, and a combo audio jack.SpecificationsGeneral Brand DeepCool Model R-CC360-BKAPM3-G-1 Materials ABS, SPCC steel, tempered glass Fan Pre-installed fans Front: 2× 120mm ARGB, Rear: 1× 120mm ARGB Front mount options 3× 120mm or 2× 140mm fans Top mount options 2× 120mm or 2× 140mm fans Rear mount options 1× 120mm fan PSU shroud mount 2× 120mm fans Performance Front radiator support 120, 140, 240, 280, 360mm Top radiator support 120, 140, 240mm Rear radiator support 120mm Expansion slots 4 Storage & I/O 3.5" drive bays 2 2.5" drive bays 3 (2 on backplate, 1 removable cage) Front I/O ports USB 3.0 ×1, USB 2.0 ×1, 3.5mm audio