DFC OE Front Brake Rotor 2WD 1/2-Ton & 3/4-Ton (1989-95 Pickup)

DFC OE Front Brake Rotor 2WD 1/2-Ton & 3/4-Ton For 1989–1995 Toyota Pickup RWD / 2WD – 1/2-Ton & 3/4-Ton Models Overview The Dynamic Friction Company (DFC) Premium OE Front Brake Rotor is a direct-fit replacement for 1989–1995 Toyota Pickup RWD / 2WD 1/2-ton and 3/4-ton front brake applications. Toyota used two different front brake systems across these trucks. The correct rotor is determined by the existing front caliper type: the 17S / FS17 system uses an approximately 248 mm rotor, while the F18 / F-18Q system uses an approximately 253 mm rotor. Before ordering, check the casting identification on the existing front caliper. If the marking cannot be located or read, measure the outside diameter of the existing rotor to determine the correct brake system. Key Features Direct-fit front brake rotor for 1989–1995 Toyota Pickup RWD / 2WD Fits 1/2-ton and 3/4-ton applications Two factory-style front brake configurations 248 mm rotor for 17S / FS17 brake systems 253 mm rotor for F18 / F-18Q brake systems Approximately 22 mm new rotor thickness G3000/G11H18 cast iron construction CNC-machined braking surfaces Non-directional surface finish Available individually or as a pair How to Identify Your Front Brake Type 248 mm / 17S–FS17 Brake System Select this option when the existing front caliper is marked: 17S FS17 This brake system uses an approximately 248 mm outside diameter front rotor. 253 mm / F18–F-18Q Brake System Select this option when the existing front caliper is marked: F18 F-18Q This brake system uses an approximately 253 mm outside diameter front rotor. Caliper identification is the preferred selection method. If the casting identification cannot be confirmed, measure the outside diameter of the existing front rotor. Both brake systems use approximately 22 mm new rotor thickness, so rotor thickness should not be used to distinguish between them. Vehicle Fitment Toyota Pickup 1989–1995 Toyota Pickup – 3rd Gen – RWD / 2WD – 1/2-Ton & 3/4-Ton – Front – 248 mm / 17S–FS17 Brake System 1989–1995 Toyota Pickup – 3rd Gen – RWD / 2WD – 1/2-Ton & 3/4-Ton – Front – 253 mm / F18–F-18Q Brake System Fitment Notes Front application only RWD / 2WD models only Fits 1/2-ton and 3/4-ton Toyota Pickup applications Does not fit 4WD Toyota Pickup models Two different front brake systems are used Do not select the rotor by Base, DLX, or SR5 trim alone Verify the existing front caliper casting before ordering 17S / FS17 = approximately 248 mm rotor F18 / F-18Q = approximately 253 mm rotor Rotor outside diameter can be used when the caliper marking cannot be identified Both versions are approximately 22 mm thick when new Does not replace 1-ton-specific front brake applications Available individually or as a pair Select a pair when replacing both front brake rotors Product Specifications Brand: Dynamic Friction Company (DFC) Series: Premium OE Product Type: Disc Brake Rotor Position: Front Recommended Use: OE Replacement Material: G3000 / G11H18 Cast Iron Brake Surface: Non-Directional Fit Type: Vehicle-Specific / Direct Fit Drivetrain: RWD / 2WD Vehicle Configuration: 1/2-Ton & 3/4-Ton Rotor Outside Diameter: Approximately 248 mm or 253 mm Depending on Brake System New Rotor Thickness: Approximately 22 mm Brake System Identification: 17S / FS17 or F18 / F-18Q Available Configurations Brake System 248 mm / 17S–FS17 For trucks equipped with the 17S / FS17 front brake system Approximately 248 mm outside rotor diameter 253 mm / F18–F-18Q For trucks equipped with the F18 / F-18Q front brake system Approximately 253 mm outside rotor diameter Quantity Single (1) Application-correct DFC Premium OE Front Brake Rotor Pair (2) Matching application-correct DFC Premium OE Front Brake Rotors Provides both rotors needed to replace the driver- and passenger-side front brake rotors