sE Electronics X1A-25AEWB X1 A 2C Condenser Microphone

The sE Electronics X1 A 2C White 25th Anniversary is a side-address condenser microphone designed for recording vocals and instruments. Its cardioid pickup pattern focuses on sound in front of the microphone while helping reduce pickup from the rear. The white-and-black anniversary finish offers a distinct visual option for home and project-studio recording setups.This microphone is suited to musicians, content creators, engineers, and streamers who need an XLR condenser mic with straightforward controls. It can be used for vocals, acoustic guitar, guitar cabinets, drums, piano, brass, strings, and room recording. A 48V phantom-powered audio interface, mixer, or microphone preamp is required for operation.The X1 A uses a 2/3-inch back-electret condenser capsule with a 20 Hz to 20 kHz frequency range and 20 mV/Pa sensitivity. Its cardioid pattern and balanced sensitivity support close-miked voices as well as detailed instrument capture. With 16 dB equivalent noise and a 78 dB signal-to-noise ratio, it is designed for clean studio recording.A switchable -20 dB pad expands the microphone's capability with louder sources. Maximum SPL handling is rated at 130 dB without the pad and 150 dB with the pad engaged, measured at 0.5% THD at 1 kHz. The switchable 100 Hz low-cut filter helps reduce low-frequency rumble, footfall noise, and excess proximity effect during close-miked use.The X1 A 2C has an all-metal housing, integrated windscreen, and gold-plated 3-pin XLR output. It includes a swivel mic clip and a mic stand thread adapter for basic stand mounting. Add an XLR cable, phantom-powered interface or mixer, and appropriate recording software to build a practical vocal or instrument recording chain.Key Features Cardioid Pickup Pattern: Focuses on the source in front of the microphone and helps reduce rear pickup. 2/3-Inch Back-Electret Capsule: Provides condenser-microphone detail for voices and a broad range of instruments. -20 dB Pad: Raises SPL capability for close-miking loud amplifiers, drums, and brass. 100 Hz Low-Cut Filter: Helps manage rumble, footfall noise, and excessive close-mic bass. Integrated Windscreen: Adds capsule protection and helps reduce plosive effects during vocal recording. Gold-Plated XLR Output: Provides a durable balanced connection to compatible recording equipment. Design & InstallationThe X1 A 2C uses a rugged all-metal chassis with a white-and-black 25th Anniversary finish. Its 58 mm diameter body measures 169 mm long and weighs 390 g. The internal windscreen, gold-plated XLR connector, and metal construction support regular studio use.Mount the microphone in the included swivel clip on a compatible mic stand, using the supplied thread adapter when needed. Connect its 3-pin male XLR output to an audio interface, mixer, or preamp that provides 48V phantom power; an XLR cable is required and is not listed among the included accessories. Use the low-cut filter for low-frequency control and engage the -20 dB pad when recording particularly loud sources.