Head Gasket Set Valves Timing Belt Kit Fit 04-05 Chevrolet Aveo 1.6L DOHC VIN 6

Head Gasket Set Valves Timing Belt Kit Fit 04-05 Chevrolet Aveo 1.6L DOHC VIN 6. The best performance longest lasting valves available to the aftermarket. A one-piece, forged construction offers high strength and fatigue properties. Micropolished to allow for less oil retention on the stem which creates less drag for a smoother motion. Replace Part : HS26378PT, ES72244, 96858745, 96350526, 96350550, 96930074 Head Gasket Set Valves Timing Belt Kit Fit 04-05 Chevrolet Aveo 1.6L DOHC VIN 6. The main function of an engine valve is to open and close rapidly. This allows the air and fuel charge to enter the combustion chamber and after ignition, the exhaust valve allows the waste gases to flow out into the exhaust system. Each cylinder has at least one intake and one exhaust valve. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head. The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder head. The cylinder head bolts hold the cylinder head and cylinder head gasket in place and ensure that the cylinder head will continue to hold up despite the tremendous amounts of pressure in the combustion chamber. Therefore the cylinder head bolts, cylinder head gasket, and intake exhaust valves are an important part of your engine. They should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. Be sure to have your worn out parts replace with our aftermarket replacement parts set as soon as they start to give you trouble. Fits Following Models: 2004-2005 CHEVROLET AVEO 1.6L 1598CC 98CID L4 DOHC, (16 VALVE), VIN CODE "6" This item includes: Multiple Layers Steel (MLS) Head Gasket Valve Cover Gasket Valve Stem Seals Intake Manifold Gasket Exhaust Manifold Gasket Front Camshaft Seal O-rings Other Small Gaskets RTV Silicone 10 Cylinder Head Bolts 8 Intake Valves (Head 28.50mm x Stem 5.96mm x Length 101.60mm) 8 Exhaust Valves (Head 27.20mm x Stem 5.94mm x Length 101.30mm) 1 Timing Belt (127 teeth) 1 Timing Belt Tensioner (bearing assembly) 1 Timing Belt Idler Bearing (left lower) 1 Water Pump w/ Gasket 2 Camshaft Seals 1 Front Crankshaft Seal