Rectangular lug adapters (2x)

The Fab' rectangular lug adapters let you fit any Fab' strap to a camera with 10 mm rectangular strap lugs, found on most Canon bodies. Each adapter loops through the lug and through the strap's ring. Handcrafted in Montreal, Canada from premium full-grain leather and secured with solid brass Chicago screws in a matte nickel finish. Nothing is glued: the screws hold everything, and they can be undone if you move the adapters to another camera. Check your camera before ordering: Your camera's strap lugs must be at least 10 mm wide for the adapters to pass through. Most Canon bodies are, but a few use narrower 6 mm slots and will not fit — including the EOS R50, R100, M50, M50 Mark II, M6 and M6 Mark II. If you are unsure, send us a photo of your camera and we will check for you. Please note: A pair of adapters adds 2" (5 cm) to the total length of your strap (1" on each side). If you are choosing a strap length at the same time, take this into account. A flathead screwdriver is required for installation. Characteristics: • Premium full-grain leather • Solid brass Chicago screws, matte nickel finish • Leather width: 10 mm • Leather thickness: 2 mm • Fits rectangular strap lugs (minimum 10 mm) • Handcrafted in Montreal, Canada You will receive: • 2 × leather lug adapters • 2 × sets of Chicago screws (matte nickel)