Transmission E-CVT Input Shaft Seal Driver
E-CVT Input Shaft Seal Driver – Honda Hybrid This seal driver is designed to install the E-CVT input shaft seal found on newer Honda hybrid transmissions. Unlike conventional automatic transmissions, these E-CVT transmissions do not use a torque converter. Instead, they utilize a dampener (flywheel) assembly, and this tool is designed to install the seal behind the dampener to the correct depth during service. The driver has been engineered to provide a precise fit, helping ensure the seal is installed evenly and without damage. Fitment: 2017–2026 Accord Hybrid 2025–2026 Civic Hybrid 2018–2021 Clarity 2020–2027 CR-V Hybrid 2019–2022 Insight 2026 Prelude Although fitment has not yet been physically confirmed on every application listed above, these vehicles share the same input shaft seal and a similar E-CVT transmission design. Features: Designed specifically for Honda E-CVT hybrid transmissions Installs the input shaft seal to the correct depth Helps prevent seal damage during installation Printed for strength Recommend driving with a rubber mallet Recommended Use Start the seal squarely by hand before installing, or place on the tool where the lip of the seal holds onto the tool. Slowly Drive the seal using a rubber mallet, stopping once the driver seats flush against the transmission housing. Notes These tools are fully 3D printed. Minor surface variations or small discrepancies in the print are normal due to the printing process and do not affect performance. Certain brake cleaners may cause surface discoloration. This does not compromise tool function.