For Dell DC16250 D16c 16 inch FHD+ LCD Touch Panel

iProGadgets Repair Parts: Dell 16 Laptop DC16250 16 inch FHD+ Touch LCD Panel — Quick AnswersQuick answer: the Dell 16 touch panel is the 16 inch 1920 x 1200 16:10 touch assembly for the Dell 16 Laptop DC16250, digitizer bonded to the panel, matte. Supplied by iProGadgets, a repair-parts supplier for phone, tablet and computer repair shops. Every unit is checked before it ships and backed by a 30-day return window on unused, uninstalled items.Key Features Touch assembly, not a bare panel. The digitizer is bonded to the front glass, so it arrives as one unit — there is no touch layer to transfer from the old screen. Non-touch machines cannot use this. The panel will physically fit the lid, but the touch ribbon has nowhere to go and the non-touch board does not drive it. 1920 x 1200 on a 16:10 lid. A panel from another size class will not fill this opening in both directions. Matte anti-glare front glass, as Dell shipped on the DC16250. Ships fully tested — display and touch both checked before packing. Technical Specifications Item Detail Brand iProGadgets Screen size 16 inch Resolution 1920 x 1200 (FHD+) Aspect ratio 16:10 Refresh rate 60Hz Touch Touch, digitizer bonded Surface Matte, anti-glare Compatible models For Dell 16 Laptop DC16250, D16c; touch version only; 16 inch 16:10 chassis Condition Fully Functions Testing 100% tested before packing Warranty 30-day returns, see the returns policy Quality iProGadgets Premium Quality Frequently Asked QuestionsWhat resolution is this screen?1920 x 1200 (FHD+) on a 16 inch diagonal. That is the native resolution the panel was built for, so the picture is sharpest at 100% scaling. If your old screen was a lower resolution, check the connector and the ribbon before ordering — the size alone does not make it a match.What refresh rate does it run at?60Hz. Ribbons and mainboards in this generation are built around that rate; a higher refresh panel of the same size needs a different cable and usually a different GPU output, so it is not a drop-in swap. Match the refresh rate on your old panel.How many pins does the connector have?Touch on a eDP interface. Count the pins on your old panel before ordering: a 30-pin and a 40-pin ribbon look almost identical at a glance, and the wrong one will not seat or will not light up.Is this a touch screen or a non-touch screen?Non-touch. It fits the opening of the touch version but carries no digitizer, so touch input would stop working. If your machine has a touch screen, order the touch panel instead.Before We Ship — Please Send Us These 3 DetailsLaptop, all-in-one and desktop PC screens can differ between revisions of the same model, so the listing alone cannot always tell us which panel is inside your machine. After you place the order we will contact you for the three items below — please send them so we can confirm the fitment and ship the correct, fully compatible screen straight away: A photo of your computer. A clear photo of the laptop itself, plus the model / service label on the bottom cover (or the model name shown in Settings → About). Touch or non-touch, resolution and refresh rate. Tell us whether your screen is a touch screen or a non-touch screen, its resolution, and its refresh rate in Hz. If you are not sure, just send the model number and we will check it for you. Photos of your old screen. Once the machine is opened, a full photo of the back of the old screen and a close-up of the label or barcode sticker on it. That label carries the exact panel part number, which removes any doubt about which screen you need. We check your photos against our stock before dispatch. If something does not match, we will contact you first instead of sending a part that may not fit. Once your details are confirmed, we arrange shipment within 1 to 3 business days. Thank you for helping us get it right.Installation Notes Clean the flex cable with alcohol before installation and confirm that it is well connected. Do not pull, tear or push on the flex cable, be careful during installation. Before installing the screen, please remove the battery in advance. Please tap the screen carefully, because the screen is too fragile to damage. Quality ControlStrictly tested by the iProGadgets QC Team — every unit is double tested before shipping and ships in good working order. After receiving the part, please check the appearance and test it first: connect the part to the motherboard for a functional test before full installation, and only install once everything works. We are not responsible for any installation mistakes — if you are not experienced with screen replacement, have the part fitted by a professional repair shop.ShippingWe ship worldwide. Orders are dispatched within 1 to 3 business days, and every package carries a tracking number you can follow on the order page. Delivery typically takes 7 to 10 days after dispatch.Returns & Warranty30-day returns on unused, uninstalled parts. The warranty is valid until installed — once a screen has been fitted, the return window no longer applies, which is why we ask you to test before installation. Dell is a trademark of its respective owner. iProGadgets is an independent supplier of repair parts and tools and is not affiliated with or endorsed by Dell.