ASI - 0755-SS Towel Bar (Heavy-Duty) – Surface Mounted, Stainless Steel

ASI - 0755-SS Towel Bar (Heavy-Duty) – Surface Mounted, Stainless Steel Towel bar fabricated of 1″ (25 mm) O.D. x 20 gauge, type 304 stainless steel with a satin finish and designed not to turn in support posts. Support posts fabricated of heavy solid cast brass plated to have stainless steel satin finish to match stainless steel. Features Heavy Duty - Round Shaped Rod - 1″ diameter Type 304 Stainless Steel - Satin Finish Heavy duty solid cast brass plated support posts Designed not to turn in support posts Surface Mounted Available Sizes 0755-SS-18 – 18″ Length (457 mm) 0755-SS-24 – 24″ Length (610 mm) Specifications Model / Series 0755-SS Type Towel Bar (Heavy-Duty) – Surface Mounted, Stainless Steel Dimensions Available in 18″ and 24″ (457 and 610 mm) lengths. Overall Dimensions (variable length”) x 2-5/8″ x 2-1/2″ (variable x 67 x 64 mm) Towel Bar 1″ (25 mm) O.D. x 20 gauge, type 304 stainless steel Support Posts Heavy solid cast brass plated to have stainless steel satin finish to match stainless steel Mounting Surface Mounted Finishes Satin Finish Operation & Maintenance Stainless steel washroom accessory products require regular surface cleaning. Clean with a soft clean rag moistened with a mild detergent, followed by a water-moistened clean rag and then a dry rag. Stainless steel should be protected against muriatic acid, caustic or abrasive materials, and harsh cleaning detergents. Installation Surface mount each support post to wall with three (3) 1/4″ diameter [Ø6] oval, pan or round head fasteners of length and type to suit wall conditions (supplied by installer) through mounting holes in posts. To mount on stud walls, provide concealed backing at screw points, secured to studs. Backing must comply with local building codes. If concealed backing is not provided, secure with toggle bolts. To mount on solid walls, use plastic or fiber type plugs or expansion bolts. For compliance with 2010 ADA Accessibility Standards, install unit so that centerline of bar is 48″ [1219] Above Finished Floor (AFF) if clear floor forward reach access is provided or 46″ [1168] AFF if side reach over obstruction is only provided. Downloads Product Care & Maintenance Technical Data Sheet – 0755-SS