Franklin Electric IGP Series Grinder Pump Retrofit Kit - 2 HP 208-230V 1Ph

Description Franklin Electric · Grinder Pump Retrofit Kit FPS IGP Series Retrofit Kits Drop-in simplex replacement grinder for positive displacement grinder systems: 2 HP automatic grinder, anti-siphon check valve, alarm float and quick-disconnect plug on an epoxy-coated steel cover. 2 HP 3450 RPM 31 GPM at 40 ft 130 ft Max Head (IGP-A-RFKS) 1-1/4 in NPT Piping 208-230V 1Ph Quick-Disconnect Plug 16.75 in Cover x 44.15 in H 123 lb Weight (IGP-A-RFKS) Overview The IGP Series Retrofit Kit is a direct simplex replacement grinder for positive displacement grinder systems. It lifts out the old unit's job in one assembly: a 2 HP, 3450 RPM automatic grinder pump with mechanical float switch, a 1-1/4 in cast iron anti-siphon/check valve, 1-1/4 in NPT piping and an adjustable alarm float switch preset at the factory, all hung from an epoxy-coated steel cover. Electrical connections are made in a dry top housing, and the kit plugs in through a quick-disconnect plug. Match the plug to the existing basin wiring. The kit is built with a black or a gray plug; where the plug on site is the other one, Franklin offers 1 ft adapter harnesses (115156 and 115159) to convert between them. The IGP-A-RFKS is the standard-head kit on the IGP-A pump. The IGPHR-A-RFK is Franklin's high-head kit, built on the IGPHR dual-stage pump. Genuine Franklin Electric equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Warranty: 12 months from the date of purchase. Growth & Multiplex A simplex replacement: one kit replaces one grinder in an existing basin. Models & Ratings Model Part No. Plug Pump FLA / Watts Total Height Cover Depth Weight lb IGP-A-RFKS 515805 Black IGP-A, 2 HP 13.9 / 3200 44.15 in 31.89 in 123 IGP-A-RFKS 515806 Gray IGP-A, 2 HP 13.9 / 3200 44.15 in 31.89 in 123 IGPHR-A-RFK 515803 Gray IGPHR-A, 2 HP dual-stage 16 / 3600 Not published Not published Not published IGPHR-A-RFK 515804 Round IGPHR-A, 2 HP dual-stage 16 / 3600 Not published Not published Not published All 208-230V, 1Ph, 60 Hz. Source: FPS Wastewater Catalog M5276 (09-25), retrofit kit spec sheet 996801, and Franklin Electric price list 996791 (June 2026). The IGPHR-A-RFK is not in the catalog; its pump rating is taken from the IGPHR-A pump on the IGPH-A page. Specifications Specification Value Pump 2 HP, 3450 RPM automatic grinder with mechanical float switch Check valve 1-1/4 in cast iron anti-siphon/check valve Piping 1-1/4 in NPT Alarm Adjustable alarm float switch, preset at the factory Cover Epoxy-coated steel, 16.75 in wide, with lifting rope Electrical Connections in a dry top housing; quick-disconnect plug Motor Single-phase capacitor start, capacitor run; insulation class F; internal on-winding thermal protector Power cable Type SOOW or SOW 14/6 AWG Source: FPS Wastewater Catalog M5276 (09-25), retrofit kit spec sheet 996801. Performance — Will It Do What You Need? Find your total dynamic head across the top: the vertical lift from the basin to the highest point of the force main plus friction in the pipe. The figure below it is gallons per minute at that head. Head (TDH) 40 ft 60 ft 80 ft 100 ft 120 ft Shut-Off IGP-A-RFKS, GPM 31 30 25 20 10 130 ft (56 psi) Manufacturer tabulated points only. Source: FPS Wastewater Catalog M5276 (09-25), retrofit kit spec sheet 996801. Head (TDH) 100 ft 125 ft 150 ft 175 ft Shut-Off IGPHR-A-RFK, GPM 30 24 18 10 200 ft IGPHR pump rating from the IGPH-A page of catalog M5276: rated only above about 100 ft, so no points are published below 100 ft. Franklin publishes no separate curve for the IGPHR-A-RFK kit. Before You Buy — The Limits That Decide the Fit Limit Value Existing system Direct simplex replacement for positive displacement grinder systems; confirm the basin and cover opening against the 16.75 in cover and 31.89 in cover depth Plug Black, gray or round plug, fixed at purchase; 115156 and 115159 adapter harnesses convert between square and round plugs Power 208-230V single-phase Head IGP-A-RFKS for heads up to about 120 ft; IGPHR-A-RFK for high-head service above 100 ft App None Accessories Accessory Order No. Where to buy Adapter Harness, 1 ft, Square (gray) Female to Round (black) Male 115156 Grinder accessories and parts Adapter Harness, 1 ft, Round (black) Female to Square (gray) Male 115159 Grinder accessories and parts Retrofit Junction Box with Black Plug / Grey Plug 115153 / 115154 Grinder accessories and parts Retrofit Anti-Siphon Check Valve 940005 Grinder accessories and parts For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC Data Sheet FPS Wastewater Product Catalog (M5276) IGP-A and IGP-M Series Owner Manual (998760) Videos Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.