Flashforge Creator 5 Pro – 4-Toolhead Enclosed Multi-Color 3D Printer

In stock in Canada and shipping from our Brampton, Ontario warehouse. Free Canada-wide shipping on orders over $100. The Flashforge Creator 5 Pro is a fully enclosed, four-toolhead multi-color and multi-material 3D printer. Instead of purging through a single nozzle every time the colour changes, the Creator 5 Pro's FlashSwap™ system swaps between four independent toolheads, so multicolour prints finish up to 500% faster with near-zero purge waste. Add a 65°C actively heated chamber, HEPA 13 plus activated-carbon filtration and a 256 × 256 × 256 mm build volume, and you have a printer that handles everything from PLA to ABS, ASA, PA-CF and PPS-CF. Why the Creator 5 Pro 4 independent toolheads: true multi-colour and multi-material printing in a single job, with fully automatic toolhead offset calibration. Up to 500% faster multi-colour printing: no purge tower, no poop chute, no waiting on filament swaps. Zero purge waste: each toolhead keeps its own filament loaded, so material changes produce next to no waste. High-speed performance: 600 mm/s max travel, 300 mm/s max print speed, 30,000 mm/s² acceleration and a 32 mm³/s flow rate. Fully enclosed, actively heated chamber: heats to 65°C to eliminate warping and cracking on ABS, ASA, PC and PA. A cooling mode draws in fresh air for PLA, PETG and TPU with the door closed. HEPA 13 + activated carbon filtration: medical-grade H13 HEPA and coconut carbon capture dust and VOCs from ABS, ASA and nylon. Safe and quiet: the enclosure brings operating noise down from 65 dB to 55 dB, with front-door and top-cover detection. Fully automatic calibration and levelling: auto bed levelling, dynamic flow (PA) calibration and auto-compensation for cleaner surfaces. Built-in Full HD camera: remote monitoring and multi-printer management over dual-band Wi-Fi. Hardened-steel 0.4 mm nozzles, 320°C hotends: ready for carbon- and glass-fibre filaments out of the box. 0.25 / 0.6 / 0.8 mm nozzles available. Creator 5 vs. Creator 5 Pro Both share four toolheads, hardened-steel nozzles, auto levelling and the same 256 mm³ build volume. The Pro adds the full enclosure, active chamber heating to 65°C, HEPA 13 and carbon filtration, auxiliary cooling, door and top-cover detection, and support for a much wider range of engineering materials. Active chamber heating is built into the Pro, so a standard Creator 5 cannot be upgraded to it later. Compatible filaments Recommended: PLA, PETG, TPU (64D / 90A / 95A), PLA-CF, PETG-CF, Silk, PVA, BVOH, S-Multi, S-PAHT, ABS, ASA, HIPS, PA-CF, PET-CF, PAHT-CF, ASA-CF, ASA-GF, ABS-GF, PPA-CF, PPS-CF. Enclosure-supported (heated chamber): ABS, ASA, HIPS, ABS-GF, PA-CF, ASA-CF, ASA-GF, S-Multi, S-PAHT, PET-CF, PAHT-CF, PPA-CF, PPS-CF. Pair it with our ABS, ASA and PLA lines, all stocked in Canada. Technical specifications Toolheads 4 independent toolheads (FlashSwap™) Build volume 256 × 256 × 256 mm Structure Fully enclosed rigid frame Chamber heating Active, up to 65°C Air filtration HEPA 13 + activated carbon Max print speed 300 mm/s Max travel speed 600 mm/s Max acceleration 30,000 mm/s² Max flow rate 32 mm³/s Max extruder temperature 320°C Max bed temperature 120°C Build plate Textured PEI flexible steel Nozzle 0.4 mm hardened steel standard; 0.25 / 0.6 / 0.8 mm optional; quick-release Auto levelling Yes, fully automatic Flow calibration Yes, automatic PA calibration Filament run-out detection Yes Power-loss recovery Yes Camera Built-in Full HD, 1280 × 720 @ 30 fps Display 4-inch 800 × 480 colour touchscreen Connectivity USB, Wi-Fi (2.4 GHz / 5 GHz) Slicer Orca-Flashforge, OrcaSlicer Door detection Front door and top cover Printer size 441 × 411 × 460 mm (520 × 443 × 710 mm with filament holders and tubes) Weight 18 kg net / 22 kg gross Power 100–120 V / 200–240 V AC, 50/60 Hz, 1200 W Good to know Filament is loaded manually into each of the four toolheads; there is no multi-spool feeder in the standard configuration. Allow at least 10 mm of clearance on the left and rear, 200 mm on the right and 500 mm at the front.