FS-SICC-0001/L11 | Honeywell | System Interconnection Cable

The Honeywell FS-SICC-0001/L11, also cataloged as the FS-SICC-0001 System Interconnection Cable, operates as a dedicated hardware component for multi-channel signal routing between modules and Field Termination Assemblies (FTAs) within Honeywell Safety Manager architectures. Hardware Specifications Parameter Specification Model FS-SICC-0001/L11 Brand Honeywell Origin USA Weight Approx. 0.50 kg Dimensions Outer Diameter: 9.93 mm (0.39 in), Cable Length: 11 m Operating Temp -20 deg C to +85 deg C (-4 deg F to 185 deg F) Power Consumption Passive component (Voltage Rating: 300 V) Cable Type System Interconnection Cable Conductor Configuration 20 x AWG 22 (0.34 mm2), Copper Shielding Double shielded for EMI protection Impedance 120 ohms Termination Pre-terminated Honeywell-compatible connectors Standard Compliance RoHS compliant, UL listed 4-20 mA HART Loop Protocol and Channel-to-Channel Isolation The double-shielded construction of the FS-SICC-0001/L11 assembly preserves signal integrity across runs between control racks and termination units. High channel-to-channel isolation is maintained along the 20-conductor bundle, suppressing crosstalk between adjacent telemetry pathways. This shielding architecture attenuates external electromagnetic interference (EMI), ensuring high-fidelity transmission of analog measurement signals and digital communication over 4-20 mA HART loop protocol connections. Frequently Asked Questions Q: What is the primary physical difference between the L11 and L24 variants of this cable? A: The FS-SICC-0001/L11 specifies an overall length of 11 meters, whereas the L24 variant specifies a length of 24 meters. Q: How does the internal shielding prevent interference across signal pairs? A: The assembly incorporates double shielding along its full 11 m length with a 120 ohm characteristic impedance match to suppress external noise. Q: What operating temperature limits apply to field routing of this interconnect assembly? A: The thermoplastic jacket and conductor insulation support continuous operational exposure from -20 deg C up to +85 deg C. Field Installation Guidelines Observe minimum static and dynamic bend radius limits corresponding to the 9.93 mm outer diameter during cable tray routing. Fasten pre-terminated connector locking mechanisms securely to FTA interface headers to prevent pin contact oxidation or vibration loosening. Verify shield continuity and ensure proper grounding at designated cabinet earth buses to avoid noise coupling and ground loops. Avoid running system interconnect cables in close parallel proximity to high-voltage AC power distribution conduits.